The Jalopy Journal
Keep in mind that the newer wheels are wider and the back spacing may not work with your suspension.
Without the rods your engine will move forward in the rubber mounts when the clutch pedal is depressed.
40 spokes are KH. 36 spokes are Motor Wheels.
SOLD
The car will be at the Springfield swap meet tomorrow (5/25/18). Stop by and check it out.
bump
Bump Call for details, 419-303-2699
This has been my daily driver for the last 5 years but it's time for a change. It has a later 292 y-block with a cruise-o-matic. The brakes are...
Now it's up again but almost all spam.
It worked here for a little while this morning but was cluttered with spam. Now it's down again.
It's not a light. It's the sensor for automatic headlamp dimming.
Herm Rost's son now owns the RPU pictured at the beginning of the thread and it still looks the same.
Yep, that's Josh.
The repo guys used to use those (back when cars had real bumpers).
I've been 18 for 50 years !
Sounds like an over-engineered version of a sprint car driveline.
"375" (or any stamped number) is the maximum valve lift without machining for additional valve clearance.
Road draft tube.
Ugly then, ugly now.
Really nice truck. As others have said, the tailpipe routing is very cool and unique. Now that you've shown it to "the world" you'll see a hundred...
Be sure to slow down when you get to Ohio. Our state troopers like to make new out-of- state friends.
I'm pretty sure the wiper park switch on these grounds through the switch in the dash. Since you've had your dash apart, make sure the switch is...
So sorry to hear this. Terry was a fun guy and had some really nice 40's.
I had a '49 Lincoln a few years ago. It had the "big" flathead (same as the big trucks). Very heavy and not a great performer. Speed parts are...
I purchase race car parts from them all the time. Fair prices and fast shipping.
I can't quote the rule book but you are correct. 10% for a gasser, 25% for an altered.
The real question is "why do they make metric wrenches?". They don't fit anything on my cars.
It usually doesn't amount to much (unless you're looking for Camaro parts). I might go, but only because it's just across town for me.
'49-'52 Chevy cars .
You don't want flip the rearend. This is a reverse rotation cam, not a reverse rotation engine. Just make sure you use an aftermarket distributor...
Separate names with a comma.
The Jalopy Journal
