The Jalopy Journal
[ATTACH] My daily soon as I go to the dmv
I totally agree I want to have the thickest core possible snd a 2 row core doesn’t sound up to snuff but msn I’m tempted to try we will see.
I’m just curious if anyone has tryed this radiator though. I’ve used cheap aluminum radiators before and had bad luck. It was a really cheap eBay...
I will thanks for the advice! I am interested in others thoughts on this cold case radiator. It will fit perfectly into my grille shell so I’d...
Brass works wanted to build me a duzzy for 3,000 and there’s radiator supply house that hasn’t gotten back but any radiator starts at 1,600 so I...
[ATTACH] Here’s the rig it will fit in!!
Hey everyone I’ve been on the hunt for a solid radiator that doesn’t cost 2,500-3,000 like I’ve been quoted. The car Im building has a pretty...
Oh and to find top dead center take the spark plug out of #1 cylinder. Rip a small sliver of a plastic bag like a grocery plastic bag next to the...
I had a similar issue on my 48 olds straight 8. I got it running and driving wonderfully but after a few spins around the block it would run like...
[ATTACH] [ATTACH] [ATTACH] [ATTACH]
[ATTACH] [ATTACH] No one’s noticed the 49 88 tail lights in the bumper guards I did so I figured I’ll show a close up
I don’t always see the point in roll bars but the customer wanted one so here it is and tank getting fit with my 2” floor riser to allow for a...
If you notice the steering is in front of the tie Rod of the split wish bone so maybe Pete won’t have a conniption. I’ll show him a 40 ford...
Oh and the seat and tunnel are 16 gauge. Makes making that tunnel easier and gives my buns some safety
It is! I sunk the seat as low as I could go and the floor panel is aluminum due to well I like aluminum and less weight means better gas mileage...
Coming together got the floors done too [ATTACH][ATTACH][ATTACH] [ATTACH]
[ATTACH] [ATTACH] [ATTACH]
I pulled the grille and bumper off my parts car and ta da [ATTACH] [ATTACH] [ATTACH]
[ATTACH] [ATTACH] [ATTACH] [ATTACH] I’ve had a parts car I stole the front bumper and grille off of and soon I’ll be taking it to get the...
Hey Marty sorry to de rail your post but I must ask where in Oregon you would recommend getting a brass radiator made. I live in central Oregon...
I’d rather bolt on a dual master in the stock location than have it out for you and everyone to see on the fire wall.
Oh and these masters were the same on olds, Buick, Pontiac, and Cadillac. From 40-58 as far as my knowledge goes.
Only thing is I’d want you to send me your old push rod back so I can make another with the jog in it for the next job.
I put a willwood residual valve and 3/16 line up front and a residual valve with a propositioning valve on the 1/4 line to the back thing stops on...
I made a bracket to mount a mustang dual master on my stock master location with a bracket and a jog in the push rod from the brake pedal. I could...
You need a continuous solenoid not a regular starter solenoid.
That dash is amazing! Great assortment of parts and making everything work together and flow.I can’t wait to see this thing in person if I ever go...
https://www.jalopyjournal.com/forum/threads/1926-sleek-t-build-thread.1233655/page-2#post-14313521 I started a build thread on my uncommon but...
Rip Dave. I will miss bumping into you at all the swap and shows. I will never forget being 15 going to the Ramada in Antioch the night before...
I think I’d have to start with some new metal on that one but that’s nothing new to me.[ATTACH]
Separate names with a comma.
The Jalopy Journal
