The Jalopy Journal
Anyone know what color this is?
I just did an msd where I put a small bolt and nut in the slot and profiled the head to give me the advance I wanted. call PTC and give them all...
If it were mine I would limit the mechanical advance and bring the initial timing up 20 to 22 and 36 to 38 total, and most importantly get a...
Way high. If you really (great engines) want a 292 call (609)894-2373 leave a message for Dave and tell him Scott told you to call.
Anyone with first hand experience. Are they noisy (wind noise) going down the road?
Thanks Ed I guess you can show me Saturday.
I have a 1930 Brookville Roadster. The stanchions and the windshield frame itself are total crap in my opinion. Does somebody make something nicer...
Does anyone make chrome or stainless trim to replace the wood around the body if a top isn't being used?
Could always be faster but happy with 9.70s for now.[ATTACH]
it will be easier to tune with more initial timing. crank it up to 30 at idle and try that. if it helps go back ant limit mechanical timing in the...
Thank you. its unfortunate but the more I googled the more different answers I found.
Thank you. I thought maybe Chet but its not that old.
I have a solid roller for a small block chevy. The numbers are
Back 119566SM and 99A26.
Any help would be greatly appreciated.....
East Bay Gassholz
They are not upside down. They are designed that way so you don't have to cut the heads for bigger springs. old school and works fine.
No updates yet but the carb base has a lot of condensation even at idle. No idea if that's normal or not.
I have videos but can't figure how to load em
It's capable of 9.60s but the bar is only good for 10.00. I didn't think anyway in hell that pass would be in the 9s.
Pass from a couple weeks ago.[ATTACH]
[ATTACH] My straight axle 53 club coupe.
[ [ATTACH] [ATTACH]
I doubt this because it runs great when it runs and even has the slight tap when warm.
I did with the one GMC Bubba recommended. no change.
Separate names with a comma.