The Jalopy Journal
Thats how you are suppose to do it.
This is what i would do if it were mine. First I would tack the back together trying to get a good fit up. Then I would cut the length of the...
24" seems a little long to me. Most of the time i use 15". You might want to use some rubber hose and do a mock up with various lengths to see if...
Here is a tech I did a while back. Hope it helps.
Do you guys really use water? I have never had any luck with that. Every time I have used water I end up with the part covered in surface rust....
If you go through park city, you should hit the alpine slide.
Does anybody have any new news on this product. I am wondering how the durability and uv protection is.
Wondering if anybody has cad files for 8ba flathead.
Or knows where I can get them?
I am going to set up my used "Rotary" lift tomorrow. Makes me think I should replace the hydraulic lines before I set it up.
nice job. just wondering how you plan on keeping it to stay closed?
that is the progress as of yesterday. ill update final pics when it is done.
i made the crease with two flat dies. just follow the line and put up pressure until it is at the angle you want.
i put the crease in because...
Cut out sheet metal to fill in the sail panel. It doesn’t have to be a huge piece, just make sure it transitions the two existing panels...
Use a hammer and a block of wood to tap it in a little.
Put the top on and clamp in place.
You can lower the back as...
The 1949-51 shoebox for can be chopped many ways. And this is one way to do it. This is a guide and may not cover every aspect of the job. So...
Separate names with a comma.