The Jalopy Journal
Had a misfire/ occasional backfire out of the right bank. Tried everything I could electrically to eliminate it and it was still there. Seemed...
I know there are different version of the heads but not sure on the heights. It looks like someone has been in here before I think at least...
I pulled my heads to clean them up and ream the valve guides. There were some assorted spring shims under the valve springs. When I went to put...
there are finishing methods for smoothing out the layers as well. depending on the plastic you use. Or some of them can be sanded and painted....
These came out decent have a little bit of an issue with my bridges on a couple of them. [IMG] That and I dropped one inside my door.
Think I am going to surprise the wife with a shift knob for the bug. I dig the idea @Paulz
This dome light cover is the straw that put the camel over the edge about 10 years ago. I spent a ton of money on parts and they came in a little...
I have been working on one out of an Xbox Kinect but haven't been able to really get much value out of it. Most of the time I can take a few...
I will say its weird designing things to be machined vs printed. You have a different set of restrictions and possibilities. crazy curves and...
I got an ender 3 pro. They are sub $200 machines and work fantastic. I switched the slicer to the prusa but nothing wrong with the out of the...
we do some pretty crazy stuff at work. Lots of printed Ti including pressure tanks. For the hobby level you could use it to make a casting...
[ATTACH]
Its really a cool tool for making hard to find or don't exist anymore parts.
wait what's wrong with my TIG welder?
So I got a 3d printer and started playing with it. Working on a dome light lense for my Continental Here is the factory part. [IMG] I took some...
[ATTACH] [ATTACH] [ATTACH] [ATTACH]
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
Edit chevy didnt have the slit window did it.
[img] seem right
I saw this car years ago on a run with my sister and couldn't remember where it was along the trail. I found it again. I think its an old...
I have a 63 conti with a dead hole. I can pull the plug wire and no change in idle. I also get some back fire through the carb on occasion and a...
last I heard it was parked on a back lot at Ford
Ford may have been deeper into turbines than we know. I have been in there turbine dyno building. Its currently used by an FRC robotics team. I...
I am a sucker for Big Red [IMG]
also new Diesel oil does not have the zddp that you need.
I know of a few more in Iowa there were 3 in a yard a few years ago.
Its your car do what ever you want.
maybe for the raw glass. Not the cheap resin used to make car bodies. If they used polyester resin and a room temp cure you maybe have 200F...
http://www.engineeringcalculator.net/beam_calculator.html http://www.matweb.com/ do some math. Saying AL and steel really is misleading there...
Separate names with a comma.
The Jalopy Journal
