The Jalopy Journal
Very nice 1946-48 Lincoln steering wheel with custom merc horn button. Wear from Brody knob as seen in photos and could use a mild restore. Would...
Hey just putting together a 37 21 stud with the temper send boss in the head right by the center dump for the upper hose. Can’t seem to find a...
No hood other than the fiberglass one
Sounds similar to what I am thinking, yeah the U adapters I have seen must work but look a little iffy personally
appreciate that info that’s good to know
Thank you ! I’ll look into it
Thanks for this link I’ll take a look!
Hi all, Trying to find any history on this 56’ Chev. Lived in Denver CO all it’s life till recently moving to CA. 427 powered car with a 4 speed...
Hey again all, Swapping my tired Babbitt 36 Flathead for a insert 37 21 stud Flathead in my 29’ roadster . Aside from figuring out new motor mount...
I have an early Flathead intake that has “ Eddie edmunds “ cast into rather than just edmunds or Edmonds customs . Trying to find out if this was...
PRICE DROP - $7999 Sent from my iPhone using The H.A.M.B. mobile app
For Sale is my 1963 Dodge Town wagon, a very low production number of these trucks were made and you don't see them too often at the car shows so...
As this is my first flathead I’m learning as I go , once the intake was off all looked good . Valves went up and down , springs compressed and...
The reason for the stop was me lifting off the accelerator it’s only under a load that it makes the noise
This is just coil wire off and turn over
Here is a video of the noise to give y'all a better idea, sorry for quality, but did what i could [MEDIA]
Compression check is done. Although seemingly low maybe ??? , it was rather consistent 1-50 2-55 3-55 4-50 5-55 6-50 7-50 8-55 I’m leaning...
I couldn’t narrow it down at the time it was all over since driving home on freeway . And now the leak has left ( and it does have oil in it haha )
I’m kind of thinking the piston skirt myself , I did pull plug by plug and listen to narrow it down and it never changed .
Came out of a running 34 , has a rebuild tag on it but probably from years and years ago . Unsure of mileage but I’m sure it’s seen quite a few...
The oil leak hasn’t returned , the knock hasn’t gotten better or worse .. been raining a lot so haven’t driven it too much . Still researching and...
Blowby yes it is a pressurized system , and I’m thinking you might be right about the crankcase . I will do a compression check and see where I’m...
Bttt Sent from my iPhone using The H.A.M.B. mobile app
1937/38 and 39 standard script headlamp lenses and bezels . One Lense has a hole in it , but isn’t cracked . Almost looks like a 22 went through...
Original 34 ford grille shell , bars in pretty good shape , little out of form towards the bottom center on a few but overall nice . Small split...
After getting it home , I hadn’t started it in about a week . Checked and was 2 quarts low. Did fresh oil , since have driven it about 3 times...
Don’t seem to show any metal flakes in the oil , all Looked good
It’s a 34 Babbitt flathead also
I should mention too, the car overheated prior to my 20 minute drive home. Pulled over, let it cool down and topped it off.. since then had to...
hey all , looking for some ideas to start my search. I recently had an issue when driving my roadster home . Pulled into the garage and had a...
Separate names with a comma.
The Jalopy Journal
