The Jalopy Journal
Your luck may be that it has been moved to the backyard , out of site , grill & rad in a safe place. Owner could still change his mind. You can...
Got mine on Tuesday in Ontario , another great read
36 cowls have the X with 4 raised dimples where rubber bumper stops are installed for the hood side to rest against. 35 cowls use a continuous...
Thanks Tim .... it's a great magazine .... looking forward to receiving it & many more in the coming years. Let's hope everything gets back to...
Yes it is worth the wait .... this is the first issue that I have used the automatic billing & that occurred 5 weeks ago. A post on the Hopup...
Wondering if anyone has received their copy
As others have said you need to be below the wishbones .... once the weight of the motor is there then you will have very little travel .... Pete...
I used the bucket seats from a Fiero in my Model A 2 dr sedan that is chopped 3". They are comfortable , a good width & if you do not want the...
Great publication , have every book up to annual 15 & all specials to #4. When you went to the new subscription process we in Canada could not...
When you went on your 200 mile trip did you put any new fuel in the truck along the way? I had a problem with my OT truck while pulling a 29 foot...
Got my 2020 Holiday Catalogue today ..... Thinking if I order from this Catalogue today I might get the items by Christmas 2021 !!!!! Got a...
I have tried thru Facebook & never had a response. I do get e-mails from them to re-subscribe now that they are setup again for international...
Respectfully K13 , I talked to both the Old Car Centre & Hortons who are listed as the Canadian suppliers on the Rodders Journal site & was told...
Beanscoot .... you got that right , I have had mine since the program started in Ontario & the service was free to check the plates at Kingston ,...
You send the plates to Kingston , they will check the plate number is not being used in the system , make sure they are in good condition with the...
Scruff , your local hot rod supplier , probably Hortons has their magazines sent to their Buffalo address with their other products .... that is...
Thanks Blue One , that’s all I wanted to know.
Wow ... it was simple question ... based on your response I am surprised you read my post & others seeing how you are suggesting not to read these...
Still waiting ....... anyone in Canada got theirs
Still waiting for #82 , wondering if anyone in the Lindsay Ontario area has received theirs
[ATTACH]Does anyone have information on this 36 , it just looks & sits right ..... in the planning stage of my 5W ..... Thanks
I agree with Jim ... you need to measure the AC ripple on your 12 volt signal using a scope or good multimeter ... sounds like the filtering...
Thanks Ramblin dan , not to worry Coconuts when I do find a copy at a swap meet I will be buying it to complete the set.
Thanks , I will look for the Street Rod Quarterly , still looking for a scan of the first report .... Thanks
Looking for a scanned copy of the 1st report in the June 1968 Rod and Custom magazine. I have the other 11 magazines with the reports in them ,...
What application would you use the following Winfield cams in , SU-1R & Su-1A , heavy car or light car. What modifications are required to the...
32's , A models , 33 - 34's are all kool ........ but nothing beats the open road in a 36 cab or roadster ....... try finding a good one .....
Yes , I am talking about the aluminium manual toploader 4 speed , 4th is an overdrive , the shifter assembly is on top of the the tranny where the...
Looking for information , adapter drawing , install pictures that will connect the 1984-87 Ford f150 4 speed overdrive transmission to the early...
Separate names with a comma.
The Jalopy Journal