The Jalopy Journal
Hi lads, Can I use a 9-1/2" pressure plate on a '37 flathead V8 using a '32 3 speed toploader? I know that a 9" is the right one to use, but I...
Hey fellas, I've heard that you can make an early 32-34 3 speed top-loader box shift a hell of a lot better by gutting out the early case and...
LUCAS flathead V8 3 bolt distributor in excellent condition, removed from running motor. These were used on Allard race cars and are a proven,...
New in the packet Chevrolet FLEETLINE emblem for 42 - 48 models. [ATTACH]
Rebuilt 1932-34 model B fuel pump with very limited run time. Was working great when removed from souped up Banger. [ATTACH] [ATTACH]
Adapter to install 2 x Webber side draft carburettors onto any standard 4 BBL intake manifold. Comes with throttle linkage, great piece of speed...
Aftermarket 1932 grille shell trim piece. As new condition, never fitted. [ATTACH]
Modified model A steering wheel for your early style Rod, really cool piece. $275 (AUD) plus the ride. Has the tapered end with key-way. Chris....
Model A steering wheel centre with Bakelite removed, cut down. Hand stitched leather cover. Perfect pre war, 40's wheel for your Model A Rod....
[ATTACH] [ATTACH] [ATTACH] [ATTACH] 1936 Ford wheel with horn button. Good condition, could restore or run as is. Very cool.
Does anybody have an update on what is happening with these Sun Transmitter electronic replacement boards? I have tried sending a message through...
Thanks for the reply. The mill l have was a stationary commercial engine used as an emergency generator. Maybe that front arrangement on the...
Fellas, How do I remove the front pulley on my '39 flathead. What's that arrangement on the front? I've seen other double pulleys similar to mine...
Hey fellas, I have a '39 Merc flathead with one of those spaced out two belt pulleys on the front of the crank. I can't for the life of me manage...
Thanks Model A Gomez, looks like a nice install. I could do the same, I have a couple of old model A steering boxes in my spare parts bin. Good to...
Hey fellas, I saw ages ago that someone had posted up a diagram with measurements for a metal flange to be welded onto the sector shaft end of a...
Thanks man, good advice. I have an Isky 1007B cam and adjustables coming as well. I figure I could mill the heads for a little more compression...
gimpyshotrods, I thought you may have had a crystal ball over there... Nice observation, I was told that it had done very little work since new...
gimpyshotrods, how do we know it's done 135 hours work...?
58custom, I believe it's '39 Mercury block that was use as a commercial / stationary generator. It's not unusual for these to be factory relieved...
No sleeves Flatjack, the pistons are definitely steel. Although I will go home and try the magnet test tonight, thanks.
I bought a 59A flathead that was used as a stationary generator it's whole life, it was supposed to be a great running motor. I pulled the heads...
Thanks gents, it's easy once you know.
Apparently there are no stupid questions, with the exception of the one I am about to ask. How do you remove the contact plate on a 42-46 crab...
tingHey guys, got some questions regarding the mechanical advance assembly of an old Mallory YA 11A distributor for Model A/B Ford. My motor runs...
Shame the images are now missing from this very informative post. Was hoping to refer to this post to fit my Kiwi QC...
Hey Steve, I just checked and this is a banger meet post from July 2006! No wonder there's no response, my mistake amigo, I started us on this...
Champion, thanks V4F
Hi V4F, thanks for the reply that basically what I needed to hear. Would you have an image of the arrangement, I'm not quite sure what you mean by...
Hey fellas, Got my Model B motor running like a top now. I have noticed though that I have an intermittent loud tapping noise coming from the...
Separate names with a comma.
The Jalopy Journal
