The Jalopy Journal
I'll add buy quality wire from a welding supply shop.
I took a tech course, but it is mainly setting the amps and wire feed right and avoiding loops in the torch line. Biggest problem these days is...
I screwed a zerk in my Jag caliper and got the grease gun
If you don't want the weaker auto a Ford 2.3 requires a rare c4 bell or $1000 SFI bellhousing to C4 or $1100 adapter to GM so look for a Chevy II...
I had factory ones in '76 Monte Carlo
car shows today in Blue Ridge and Macon
Moonshine festival in Dawsonville Oct 21-22 could be called a gathering of '40 Fords
Bonneville bicycle record behind that same streamliner in '85 152 mph (may be higher now)
I checked. Same as Chevy #4181
[ATTACH] [ATTACH] 2017 Ridler You have to bob the fenders so they don't just hang down.
new 4" Scat crank is $900 for comparison
I will start one so y'all can keep me motivated at 69 y.o. Once the sun comes up and I can get some pics of '39 Olds.
I thought there were no 2 door Chevy II wagons so this is a custom
There are guides to get you started. Vertical angle for traffic signals is a good one as moving the seat back cuts into this.
they don't list it, but Limeworks has metal teardrop hood blisters or if you want to minimize the size check with slatflatsspeedshop
I pulled it apart and correct female spline is there. Can't rotate it with wrist action so will try adding a bar across U joint as not sure how...
not yet. My help left and we stuck it in a corner. Have to move some stuff to get to it but have to go to work also. did check behind gear and...
Out of the way so may be reasonably priced. Some memorabilia also.
adapter is 5[ATTACH] [ATTACH] " long
May just have to drive a dual quad 455 with 4:11 gears[ATTACH] [ATTACH]
I have a SP400 and bought a Doug Nash overdrive a couple years ago. I verified the input case was the TH400 but when I got around to installing...
Mustang II used same clutch behind V8 so check engagement
price is right on this one...
I had a '66 Ford PU with all that
$100 at HD will get you two 3'x8', enough to fill bed[IMG]
handmade Lil Scalper on youtube[IMG]
SWAG uses this drive for a bead roller with a https://www.harborfreight.com/router-speed-control-43060.html
Try running it without blower belt. You may be pushing coolant out with a leaky intake gasket.
Separate names with a comma.