The Jalopy Journal
Early Mickey Thompson needle bearing rockers...awesome pic!
Thanks for sharing the pictures. I saw this on fb last night [ATTACH]
[ATTACH]
Thank you, I will call him. Here's mine from the 90s [ATTACH] [ATTACH] [ATTACH]
Desperately seeking a 23 T Body like this with the inner fender wells already glassed in. The was a Cal Auto body, and had a turtle deck. If I...
Gary Cagle [ATTACH]
Looking for a T Bucket body. and turtle deck like this one, with the inner fenders already glassed in. This was an original Cal Auto body that my...
Thanks krylon32, ledsled and nickthebandit for your time and help. I've got this mess figured out. You guys were of great help, and spot on with...
If you look at the first pictures of the old Moon hub, they have a lip seal already in them. My spindles dont have that pressed-on ring, so is it...
Thanks for you guys' help...so far so good. Would you happen to know the OD on the spindle that the seal rides on, and the ID and OD of the inner...
I've looked and looked here, and can't pin down a definitive answer. Do 32-33-34 Ford spindles take the same inner and out wheel bearings, grease...
I read a story a *long* time ago--Dutch had painted a guys early hot rod, flames, stripes etc. Just really simple stuff. He also painted a tiny...
That sure looks like my dad looking at Ivos Dragster [ATTACH]
Really sad~~~ Rich told me a story of how my dad convinced him to run Torco oil in his early Roadster, he was extremely grateful for the tip. Now...
Did anyone else notice the water spewing out of Kalittas Dragster^^^ on the cover of HRM^^^ Big Go Issue^^^ ?
Ramchargers T/F car in the background with relatively new 426 -- awesome picture.
Lucas Stabilizer suggests that all motor oil is UNstable until you pour it in---
After 7 years of building this thing (90s), I took it for the first test drive. No interior at the time, just Mexican blankets. I pull up to a...
Thank you for all of the great pics! This is Don "MiloDON" Alderson, Don Hampton, Gary Cagle, I dont know who the shirtless guy is. The year my...
Kind of older/semi-modern day, but this is Clayton Harris--Top Fuel Notice the spray bar misting Nitrous right into the Injector of his Fuel...
Try this for starters-- https://www.jalopyjournal.com/forum/threads/hemi-tech-index.118764/
Gary Cagle--1961 Fremont or Half Moon. Polished blower, so it was probably borrowed. [ATTACH]
We took this car to Pomona one Sunday (while running the newest car) and parked it under the bleachers. It was one of the old PVTA Meets. Digger...
I would *like* to talk to Don. I've called Holley and all they will do is take my number to have him call me. It never happens. Mike at...
I've always thought about why surface gap plugs weren't used more in automotive applications. I have 2 of them in my 80s, 18 hp outboard and it...
I've done a few in car. After you get the upper seal out, I always spray some carb/brakleen on a few pipe cleaners and run them through the seal...
I took this pic at a Goodguys Sonoma Drag Racing event in the very early 2000s----laying by the base of the tower with trash/dead weeds all over...
I remember my dad saying that he could make flawless aluminum to aluminum welds with an oxy-acetylene torch. He came to our house a few times and...
We had just made a pass at Lions one weekend, and were at the far end/shutdown area picking up my dad. Here comes Potter, no parachute. We ran in...
Separate names with a comma.
The Jalopy Journal
