The Jalopy Journal
I got a nice 9" that is brand new from a buddy that was setup for a Falcon. There are no Drums or backing plates that came with it, just axles and...
delete
Ok, I am new to welding, I usually have my dad who is a good welder but mostly on clean, new thicker metal. I see what you guys can do on here....
Up for sale a set of 12.00 - 15" Blackwall pie crust cheater slicks. These are dated 2011 from the UPS label, stored inside in nice dry garage....
Just like the title says......Surface grinder, original owner. Jim [ATTACH]
Wondering if you guys can help me out. Do I have a Coupe or Sedan Cowl based on the position of the hinges to the top header? I think it may be...
Hello going to be de-rusting some Model A panels soon and doing metal work. What's a good sealer primer or any kind of primer you guys are using...
A pair of Batwings made from 41’-48’ Wishbone ends. $60 Shipped. PayPal is good. Thanks!
Delete
Hey Guys, I’m looking for some pictures of how you made up rear body mounts on some ‘A’ Coupes in the rear cross member area. Something that...
Sunnen Hone with Arbors /Mandrels and Stones. Please see pictures. What is on the tarp is the tooling going with the Hone. There are some larger...
SOLD! Guys, got this new CSR Platinum Pro Starter, my uncle modified the plate to adapt a sbc to an early hemi manual bell housing. Not sure it...
Trying to find out what magazine did an article on a Blue 39 Nash coupe that was an old gasser with a steel tilt front end. Rodder’s Digest I...
Does anyone have pics of an aftermarket frame with 2" kick up in the trunk area of a roadster or coupe? Do they all need to have the sub rails...
Guys, I can’t tell, is this a 40 or a 47 Ford Coupe? I know it’s on a more updated chassis, but that aside I’m leaning toward 47, but I’m not...
Would one of you guys mind taking a tape measure and giving me the dimension for a 30-31 Coupe door Width? Much appreciated! Jim
Guys, Ive got these nib roller rockers for early Chrysler Hemi. What Brand are they? Titans? No markings on them. Can you guys help? Thank You!
Is the the correct way? From Pete and Jakes? 1/8" from center of tire to face? Which equals 1/4" total from rear of tire to front of tire? Thanks!
Alright here is what I got.I flipped my tie rod behind the axle to fix the Ackerman. Is this enough clearance? Technically the tie rod should move...
Ok, I'll try to make this simple as I can. Had my car on the road 10 years or so. Recently switched to a new disc brake setup. The difference in...
Any of you who own these have any close ups of the tread pattern? I cant see them that well on Coker's Site. I know a few of you have them on...
What do you guys think? Over the weekend I finally got rid of the wires on the front of my car. They were starting to show age and rust. Bought a...
Can you guys help me with a good pan that won't rust 1 1/2" down from the bolts after 2 years?? I live in the NE and even in a garage the car...
I know its early but Ive got spring fever. Are there any spring or early summer shows in the North East that will have some vintage tin to buy?...
Do you guys have any creative ideas to haul a roadster with no top and open trailer and keep out of the elements? There is a guy who road races...
Who makes a good set these days already chromed? Not speedway. TP is out of biz now.... I got a set on my T that have to be 25+yrs old and been...
Guys, can any of you give me the dimension from firewall to center of rear wheelwell? I have a short wheelbase 2x3 chassis with a motor in it I...
Guys, Need a little advise. I’ll try and keep this nonsense short. I am thinking about my next build. This will be a long term project...
What does it take to find a Truck Cab for a 30-31 Model A? Want ads nadda, Everything is totally overpriced and seems like nothing further east...
I want to pick up a set of ET Gassers with the as-cast centers. Before I order I just wanted to ask are these going to corrode or get funky in the...
Separate names with a comma.
The Jalopy Journal
