The Jalopy Journal
Question. Is there ANYone on here that happen to have bought a Deuce Roadster that had the original interior in it, and they took it out for any...
What bottom radiator hose did you guys find out that fits a Deuce, SBC with the raised W'pump housing, (places the fan in the middle of the...
Looking for someone that has installed a Cartouche interior kit in their Deuce Roadster. Looking for good pictures of what it actually looks like....
Any of you guys live up here around Somerset, PA? Thanks.
Anybody out there selling or making the stainless steel king pin lock and stop nut kits for a '32 front axle? Thanks
Hi, looking for rear hood latch location measurements. I am making polished stainless rear hood latch mounting brackets, to bolt into existing OEM...
Do any of you PA guys know what is going on with the Paint Chop? This past month I have sent several emails, a snail mail, and left phone...
Question; Is there any way to remove and replace "successfully" the contact plate/spring that is in the back part of the headlight switch...
Where do you guys get your metal, generator, distributor, firewall, ? GM, Ford, ID tags? Thanks.
I have a question for any of you '32 Roadster body (Brookville) gurus. Where is the exact location they stamp their sequence numbers at? Thanks.
Where could I find pictures of what the original interiors looked like in the '32 Ford? Thanks. (I have already did a search here and GOOGLE, and...
In the very early '70's there was a Holley 2 barrel to 4 barrel carb adapter. Like every thing else back then, it probably was stamped with a...
The pictures speak for themselves. Chincy/plain old rubber fuel hose, pinched at that. Thought I'd just change out the barbed (rubber hose)...
Has anybody (successfully) sanded, buffed powder coat (bad orange peel) on body panels?
[ATTACH] [ATTACH] [ATTACH] [ATTACH] Nice '61 Dodge Convt. 383 (6 bolt V'covers), push button, aluminum 727, with original park/E'brake on the...
Any of you AU, "down under" guys planning on attending any car shows (Carlisle) this summer? Thanks.
When you guys gut an old OEM 12V battery, and use it to cover a new modern, performance battery. What new battery (brand name, model #, etc) are...
Does anyone know if the non staggered bolt hole, script, SBC (283) V'covers can be turned upside down and clear the rocker assembly? Thanks.
What car/vehicle had the narrowest, thinnest, shortest (smallest all around) bumper guards? Thanks.
Is there, or does anyone have, a template/schematic/blueprint, showing where to drill the hood hardware, (hold down latches, handles, frame hooks)...
Which one of Eastwood's exhaust manifold paints, looks like raw cast iron?
Could use some suggestions (shortcut?) on welding bumpers. Maybe someone has invented a "better mousetrap." Say, narrowing a simple early '30's,...
Anybody have a good, clear, downloadable picture of the Lincoln script that is on the Y-block v'covers?
[ATTACH] [ATTACH] [ATTACH] [ATTACH] Any of you guys know what this steering box goes to?
Anyone know who makes the re-pop '32 Ford bumpers out of stainless? Thanks
When and what was the last vehicle the "factory" produced, US and foreign, that had provisions for a hand crank starting system? My feeble 5...
This 'might' be of some interest to some,,,,,,,,,,,,. http://www.chuppsauction.com/auction_11.htm
Can all you '32 gurus, or those with original unmolested frames, tell me what you have, or what is OEM for the front Houdaille shock mount center...
Does anyone have the '32 Ford "front" Houdallie shock mounting hole measurement? Also, what is the arm length, and the offset? Thanks.
You guys know of any muffler shops in Denver, Col Springs, that does mandrel bending? Thanks.
Separate names with a comma.
The Jalopy Journal
