The Jalopy Journal
I used a 62 bus in my 31 tudor.
In 1998 when we moved to Sidney Nebraska, I went to the DMV to get my truck transfered. the county number was 39 the plate number was 3939.
65.75 and still building my own and collecting parts for the next one. 31 A tudor/27 Hemi, next one 28 Willys Whippett tdor / 3.9 Mopar V6.
Congratulations Sarah. Nice of you Dad.
In western Montana in November '66 ,my younger brother and I were coming home from school ( a 31 mile trip) , the wipers quit on my 49 Ford Deluxe...
I use my 1946 SA200 Lincoln gas welder, and have a sears home and shop buzz box that will only run 6013. My big one is at my brothers, it is a...
In 98 an old friend of mine called me and asked if I wanted his old grain truck. of course I said yes. Went to pick it up and it turned out to be...
I'm running a Dodge 270 Hemi in my 31 A tudor. Paid 10 bucks for it and sold the flathead tranny adapter for a 100. Used the cash plus to rebuild...
If you use the Ford wheels on the front they will rub on the tie rod ends, the Ford wheels have about an inch more off set, the wheels up to 68...
Thanks to all that have, are and will serve, I have to get to town, we have to put up the flags on Main Street. Have a blessed day.
They look like they could be out of a six.
I used the roof off of a 93 Grand Cherokee. A nice fit.
I have made my flanges with the cutting torch for years. I also cut header flanges with the torch.
My 28 Whippet tudor has 4 door hinges, and a double rib on the body.
Thanks guys I think that I am going to be busy , looking at all of these, at least as many as I can.
The wifes Grand son had his wedding at Das Essenhaus a couple of years ago, Yu are right about the food. Thanks for the info.
What to do in Elkhart from Sept 5 thru the 10th., will be there to see the wife's new Great Grand son. Her first. Would like to hook up with any...
I don't have any plates to send you. I adopted my first wife's two sons and daughter in '74. I raised them as if they were my biological kids...
55Dodge 270 Hemi in my 31 sedan.
I just gave my brother (synchro7 ) two 57 Y block 4bbl intakes this last weekend.
I did a 59 318/torque flite in a 57 Dodge pu, we usde the push button shifter out of the car. Mounted it in the dash, worked just fine.
The lug bolts are usually marked with a L -left R - right on all the old Mopars.
Use a 318 points distributor, a direct bolt in.
Check with any John Deere restorers, the 55 combine used a Herc engine. I don't know the cubes on them. I used one on my Lincoln welder.
On the one that I had the clutch master cyl. was 1" and the brakes were 1 1/8", I rebuilt mine with no problems. The clutch cyl. has a spring...
I have some title info, PM me.
Happy fathers day to all. Mine hsa been gone for 41 yrs, still miss him.
Did any car maker use a 16" wire with a 5x4.5 bolt pattern?
Thanks in advance.
On the rear u joint you can use NAPA's # 319 ujoint it will fit the mopar shaft and the ford yoke.
Separate names with a comma.