The Jalopy Journal
I have a rearend that I am sure by measurements and spring mounts is a '37-'40 Ford rearend but I'm not sure if its out of a car or truck....
I'm assembling my rear axle after rebuilding the brakes etc and I know when we used to work on grain truck rear drum bearings we always packed...
Where can i get some aluminum wheels polished in or around central illinois, thanks, tomcat 1
I had a friend ask me the other day where to find the VIN# on a 1945 or 46 chevy pickup he just got? I told him I never owned that year but I...
Hopefully someone here can help me. I removed the top peice of stainless trim that goes across the top of the rear window glass on my '52 Olds 88....
Wanting to know who sells the rolled lip type of panel that goes along the bottom of the rear of a 30-31 2 door sedan Model A. It's like 2 1/2"...
Just got back from a fun day at the American Streetrod Assoc Vintage Weekend at Rantoul Illinois. I could only go for Saturday and I had to park...
Wondering if anyone can tell me exactly where to find the vin# on the frame of an F3 about 1949 vintage........Thanks
HELP I need to order some extra long brake hoses for the front of a rod I'm building with a '40 ford car front end. Thought I'd try speedway...
I've got a 1957 Chevy 210 2 door that I would like to lower. I'm wanting to do it without the expense of lowered spindles or springs from some...
I know where there is a 1940 Plymouth coupe that been sitting in a shed out in the country for a very long time. Wondering if they are desirable...
I've got a '49 Merc with the one piece back window and want to change it to a 3 piece back window. Hopefully someone can help with my question on...
I've got a friend with a 1946 Ford coupe that is dripping oil out of the vent opening on the right front of the oil pan while running. Is this due...
:cool:Anyone going to the James Dean Festival & Duck Run this weekend? Its a great place to check out A Lot of Mercurys if your wanting ideas. How...
I know where their is a 1963 Olds 88 four door. Looks decent,supposed to run good. Not to familiar ---is this going to have a desirable...
Went boneyard scrounging the other day and came home with three of these wheels off of a 51 chevy. Look to be fairly old, 60's I would guess.I...
What are all the names and initials for under the member names? How long are you considered a newbie etc?
I've got a 1988 Nissan pickup 2wd that just got totaled out and was wondering about saving the 5 speed trans. Does any one know if it is adaptable...
Any one know how to convert an F3 8 lug front axle to 5 lug. I don't know if the spindles are the same as car or 1/2 ton? Thanks for any info,...
I'm old school in more ways then one so I hope I'm doing this right, I've read alot of forums before but never found one that got my interest up...
Separate names with a comma.
The Jalopy Journal