The Jalopy Journal
My wire was there, not sure where it came from, possibly split from the tag light.
Hemi's are overrated.......
Put the Dzus inside the panels, not thru them. Aesthetics
this may sound odd but, a partial blister that covers the...
I do not know how the shocks were mounted. Looks like behind the axle to the outside of the wishbone, but I do not see a mount.
I wonder what kind...
a 30 base is more square, and a 29 is tapered toward the front.
The doors will hit a 30 seat in a 29
it will stink up the oven, don't do it in one you cook food in.
BTW I have no idea what it goes to, I just searched rotary car clock and found it
there is one on etsy for $1500...
ask for help if you need it, I am just around the corner
wow, quite the setup. The bumper all the way around the fender is interesting.
my firewall is done and painted, so hoping to not cut and weld. I am ok with drilling a few holes
does anyone make a mount specifically to move the master cylinder from under the floor, to a firewall hanging pedal style?
Or do I have to just...
woah, the Keystone Cops car belonged to a friend of mine. I thought about buying it several times but never did. It had a Chevette engine
That 33 with the side mounts!.....drool....
I have seen this car at shows. If i remeber corectly, it is Streetrod with white walls. aka, IFS, non traditional stuff. Nice car though
"That's gonna be cool when it's done"
yes, the speedway kit fits 16" wheel, but not a 15"
I have it on my 33 with 16" wheels
A lot of length added to that hood. Wonder if it's on a different chassis?
Offset hood scoop?
I ground from the started bolt to the chassis, and from the block to the firewall
oh yeah by millersgarage posted Aug 17, 2014 at 3:24 PM
never heard of an 81A designation. Looks like a basic flatty
Wonder why the offset genrator?
I have seen oil return lines in the pan, or...
4x4x8's and jackstands, roll the chassis out from under it.
I just used a floor jack, and some scraps to list it up high enough
I use the Lucas booster. My 302 spark knocks during hard acceleration without it
I have an F1 frame that has cross steering. To my knowledge Ford didn't offer this on pickups.
Can you help me figure out what these are on the...
they work great with the correct setting tool. 2 handles job, not the hardware store pliers type.
I only use them for light duty stuff, never...
make a nice little drive around truck.
There is one I saw at Columbus this year, super nice clean truck. I think it had a v6
roadsters are the smallest door, then there is the 4 door.....
All on the same floorpan.
you could just make a 2 door Phaeton
Tudor doors are 38 3/8 at the beltline, Cabriolet are 33 19/64
Cabrio is almost a 3 window coupe with the door tops cut off.
Quarters are very different than a roadster
Windshield frame is squared off on top....
@flynbrian48 they were put to good use :)
Separate names with a comma.