The Jalopy Journal
On my 41' Willys (Chevy 350 mild build) the electric fan stays on to long. I had to replace the sending unit last summer (On vacation) when the...
First of all... Thanks for your response! I (And some friends) haven't been on this site in a while because there always seems to be someone with...
I have a 41' f'glass Willys sitting on an S-10 chassis that I made a set of front Nerf bars (And grille). Anyway, I'd like to do the same on the...
I purchased a Rolling 41' Willys (Glass) project with a crate engine (350), TH350 trans & an S10, Rear-end. I installed a mild cam, 700R4 and a...
Thanks anyway... The HAMB Calendar is cool, but I need room to write daily appointments & To-do stuff... The Rodders Journal calendar is to...
Hey>>Anyone know of a company making Gasser or Nostalgic/Old school calendars for 2018? I usually hang up Harley calendars in the garage (Also...
In the early 1970's, Frank used to come into Beecroft Chevrolet on Niantic Ave. (Cranston R.I.) & buy auto parts from me... Always cheerful (His...
------------------------------------------------------------------------------------------------------------------------------------------------...
I'm a Biker and a car guy (2000 Softail Nightrain & 41' Willys), whenever I travel I bring my "Harley owners Group" Map and my NSRA "Fellow...
OK, problem solved! After having only "Partial" success putting the bleeders temporarily at the top, I went to A/Zone and bought two plastic...
I hate yellow, seems that I've bought a few cars already painted that color (Suede Black will be the Willy's color when I have time), same for 3...
I remember the time that I took a car (That I just bought) off the a car carrier, there was no brakes! The person delivering it to me said that...
You may be correct but the price for a new rear Disc setup was cheaper than buying a new Drum setup, plus used stuff in good shape is hard to find...
--------------------------------------------------------------------------------------------------------- WTF? Run with just the front brakes?......
We'll see (Later) today!
I would have done the caliper "Re-position bleed" in the beginning but there was solid fluid (Not one bubble) when I bled them (Running and...
I've been working on cars, trucks and motorcycles for many years but this problem is driving me crazy! I bought an unfinished (But drive-able)...
--------------------------------------------------------------------------------------------------- I'm running into this problem now with a 66'...
I need the small spring that attaches to the emergency brake strut inside the Brake drums: Ford 9" (Need 2). I bought the Hardware kit and the...
Looks like a neat setup! What I decided to do was use a L&R rear cable from an S10 to match my Chassis, I already modified & installed the 9"...
----------------------------------------------- OK, send your E-brake photo, Thanks!
I'm looking to "Old-school" /Invent a set-up, not fond of "All in one" store bought kits... But thanks anyway!
I just shortened a Ford 9" and am ready to install it (Had S-10 in it) into my 41' Willys coupe. I'd like to start-off by fitting a set of rear...
As you may know, the residual valves for a master cylinder mounted beneath the floor are 2 pounds for Disc & 10 pounds pressure for Drum brakes, a...
Runs below 180 while cruising & at high speed, but gets hot (220plus) in Florida traffic... w/antifreeze mix. Temperature Sender is mounted on...
I punched in 5-3/8 water pump pulley... Nothing @ Classic Industries March performance has a 5-1/2" Billet pulley ($$$)... No billet for my motor!
Filled up yet?
I'd like to spin the water pump quicker on my 69' Chevy engine. My present stock pulley (Still on car) measures just over 6" (About 6-1/4)... Is...
My 41' Willys sits on an S-10 frame, with the stock 3:42 rear-end (Centered chuck, but offset at one wheel well) I have a 76" Ford Granada 9"...
Separate names with a comma.
The Jalopy Journal
