The Jalopy Journal
Thanks will do!
I just got a 1951 henry j 4 cyl engine and trans, im going to use it on a project build is there a top loader trans that will bolt up to the...
Long range forecast say's 60 degrees and 40% chance of rain, that could change it's Iowa.
The Cedar Rapids Swap Meet is coming up on Saturday October 19, Lets hope the weather is good and the place is packed with vendors!
I will be there Saturday, not sure if im going to drive the 28 coupe or 51 Henryj
The fall swap last year there was lots of stuff on the track, the spring one nothing, but it rained hard! I will be there looking for more things...
A little windy but good, vender turn out was up and prices were good I found a fuel cell a pair of model a headlight lenses a gas pedal with...
So far looks like no rain, I will be there looking and hoping more vendors this time!
Just got a 38 Dodge front end for free, looks like it will fit the build real nice!
Thanks for all the info, I have the front axle stored at my brothers place right now so I cant get a pic, I do know its 26 inchs from center of...
I just got a 28 Essex coupe body with the original frame all of it just in parts for now. What im wanting to do is keep the original front spring...
It may slip I had it running and brought it up to about 4800 rpm didn't slip then, but like I say it might
It is small for a V8, not looking to make a huge HP gain.
Didn't mean to offend you but was just making a answer to your statement about setup
This is not the first one he has built, he has changed what was needed.
When he built this it was on his test engine, same brand of intake but for some reason this one has a slight tilt, any problems with it and he...
A friend of mine just got this one done for my sbc, way cool![ATTACH]
Sold to a Hamb member, going to California!
I found a nice Edelbrock 2925 intake manifold, a manual steering gear, valve covers and a small hei distributer,
Sounds like the weather is going to be good this Saturday. Hope its a great turn out for vendor's and buyer's!
Got ahold of kaboo, he has it up and running sounds great and he said it's real responsive and idles nice
Why, cant he answer on here im sure other people would like to know.
Did it work ok? I have been thinking about ordering one of these, is it responsive from idle like they say.
$2250 Motor is bolted in with a 350 trans and brakes are working, this is as low as it go's
$2350 this weekend
27 t coupe body, come's with rolling model a chassis with mounts set up for sbc and auto trans, has all steering parts and brake master cylinder...
Gonna be there for the last one, will be the first long ride in the new build[ATTACH]
I have a VERY rusty but complete Volvo 444, has twin carb motor I didn't try turning it, but did dump oil in cylinders. Has a clear title, let me...
I bought a set of weld, cragar 30 spoke wheels and some valve covers for my 31. The wheels have been painted but they will clean up.
Sounds like its going to be cold early in the day.
Separate names with a comma.