The Jalopy Journal
I coat the cam liberally in Moly grease, to the point you can not see the cam itself.
After priming the oil system I run at about 2500rpm for a...
Had a neat array of cars and stuff, and a cool warehouse/shop in South SF
condolences to his family and friends
there not spring plates for rear leaf springs, sandwich the rubber to spring ????
A Marr's car watch would be neat.
How much does it leak ?
I have 2 early 60's Chevs with a similar steering setup, had a similar issue trying to rebuild one of the valves, went...
61 - 64 dog dish are also brass.
59 and 60 dog dish should be the same.
1933 Ford Deluxe 5 window coupe, B model, (US body) world production 27
get it running and see how it runs.
2014, at the time it was Lake Bonneville
the urethane composition has changed in the past 10 or so years, apparently due to some chemical that is damaging to the environment being removed...
Thanks for posting, I have been to a couple of these events, 100% memorable.
last time I went was in 2014 or 16 foggy memory.
When did the...
Firstly you will need to know what 94's you have. there is approx 3-4 different sizes/versions, the biggest is the VW bug spray, they are around...
Geometry. Geometry, Geometry.
Do it, just make sure you take both heads off, if one head gaskets gone, it is likely the other won't be far behind....
just the weight saving alone is worth using it.
Not mine, but interesting
AA and BB bell housings have a different bolt pattern to the primary engine housing, I have had both, the images above are BB truck, I adapted a...
The 302 firing order is 1-5-4-2-6-3-7-8 and the 351 order is 1-3-7-2-6-5-4-8. Both will have counter-clockwise distributor rotation. All of the...
Just about every engine I put together for the street (some 10 now) I have never even used plastigauge, a few of these engines are still going...
This is an old article, Lamar Walden has been dead for over 5 years now.
Lamar was able to get up to around 1000Hp out of his modified 09's.
here you go, check the 7 minute mark with Norm changing gears in his EH Holden (1964) 300HP 6 cylinder Holden 6, 3 on the tree.
I have used 1" bore master cylinders almost exclusively, with Disc/drum combinations, with modernish brakes, ie 70's stuff, GM and Ford, used with...
With any of these critical parts, safety is paramount, your life might depend on it. Price should never be the reason to buy a critical part.
Separate names with a comma.