The Jalopy Journal
New Brookville Roadster
1928-1931 Model A Quarter Panel Triangle Pieces
Brookville # A160
$65.00 Shipped to anywhere in the US
Will Ship worldwide...
New In the Box Brookville Roadster
1931 Model A Running Boards
With Mats and Stainless Steel trim.
Brookville # A-184-B1SS
Free Shipping to Lower...
New Beam Seat Belts, Pair
$85.00 shipping to US included, Will ship worldwide contact me with location for shipping cost
PM or email at...
New Classic Instruments Part #VT02SLC In the Box
$375.00 Free shipping within the US.
Will ship Worldwide Contact for shipping cost
PM or Email...
mine... currently in limbo trying to get the garage at the new house set up to move everything down.
pic of my 49 packard chopped channeled and slammed. Kindof an old pic alot more done to it now.
I have probend benders available at a discount to hambers if anyone is interested. They use hossfeld #2 tooling and feature a 24 or 30" travel...
I removed the floor of the car set it over the new frame I was using (later model frame) and built support braces from rocker to rocker. Then...
I repair cracks in cylinder heads and blocks in my shop frequently. I have had no problems with the system that I use. The products i use are...
its norcal in the tahoe national forest. unfortunately it is snowing more right now. figures that my dad has a 6 car garage here with 6 cars...
there are a couple methods explained in tex smiths book on chopping tops.
heres a pic of the car. I just got it back on the finished chassis last week. 5" chop 6" channel airbagged
another rear bumper pic.
The console sit about 3" above the trans and driveline tunnels. I have one bracket near the rear and one that will swing under the dash. It...
Did a couple custom fabricvation projects this weekend for the packard. a rear bumper and an interior console. The rear bumper is made from mild...
also not the same year. its a little drastic though. my 49
I have the frist gen kit and I have done everyhitng from small parts to the front inner sheetmetal on my cougar to the frame for my packard and...
www.metalmeet.com awesome site
heres a pic of the body mounts. I simply spaced the mount bracket 1/2" away from the cross braces that run from rocker to rocker and welded them...
one more, of the trunk with battery box , fuel cell caps. Since I have cut the hole bigger in the floor and raised the fuel cell and battery box...
Separate names with a comma.