The Jalopy Journal
Thanks Glenn! In delving deaper, that's exactly what he said. Got to hunt down rear end gears.
WHAT REAR END WOULD THAT TRUCK HAVE COME WITH?
Thanks Everyone! I can always count on you Folks for support, and I appreciate it.
Just wanted to make sure there wasn't any inherent issue I...
Thanks! That was my thought. All my other rides highway cruised fine, but not familiar with something from the mid to late 50's...(Rear end...
I have the chance to buy a 100pt. restored '57 GMC 100 Pickup, because the old timer who has it says it's really slow.
The weather is too salty...
Looking for a real Alignment Shop.
My Guy was Old School, and didn't work just by factory specs, but he died.
Any suggestions would be greatly...
No matter what I tried, couldn't get the Blue off the Whitewall. Never had that issue with Diamondback.
Dual 2-Barrel Progressive Carter/Webbers on my '49 Chevy Styleline.
definitely cleans up the edges. the headliner attaches to a flimsy aluminum barbed trim which bends easily when removing the old headliner.
Great Job!! Thanks for sharing.
You sure can! I did my '49 Chevy Seat Backs with great success. It dries to a crusty surface, so I lightly brushed it with a soft bristle brush....
Stock '49 Chevy Styleline Arm Rest. Faux painted woodgrain.
3M 90 applied to both surfaces.
Attach before it dries completely.
Steamer will reactivate glue if needed.
The substrate I use is Sintra brand....
Fronts have more of a radius. But if you don't have both to compare, it's tough to tell.
My 3100 I built a few years back. Ford repops on the fenders, and aftermarket marker lights in the bedroll.
My '49 (Blocked with 300 grit, and satin cleared)
Brother's UniBody (Blocked with 300 grit, and satin cleared)
My '50 3100 (Just the way Mother...
Don't touch it!
My Butt must be made of Bakelite, 'cause it Stinks!
Pic would help!
On my '49 Chevy the fasteners could be anything I wanted. The center brace clamps to windshield trim, and the ends...
Thank you so much! The car was very well received, and had a steady crowd at Mecum, but the market has definitely swung toward the restomod buyer...
I dropped the Reserve and the car sold for only $20,900. to a Dealer.
Immediately realized it was a Resto-Mod crowd by the 2nd day into the...
Excellent job on representing the Event! Even with the quality of cell phone photo technology, it still takes a great eye to take a good picture!...
Yep! That was my Build. I have a vacation home in Ormond Beach, Florida, so I figured it would get more action down there. Didn't draw what I...
Great Catch! That's exactly where the car is.
The Old Watch Factory is now mixed-use office/apartment/restaurants. Long overdue! Glad to see all...
Thanks for the clarification guys!
Can't get a State-required annual Inspection without one in Massachusetts!
And now the process is video'd!
I think you're talking about the Shed Roof? Yeah the contents are fantastic, but that high roof isn't doing much at all!
Separate names with a comma.