The Jalopy Journal
I think Andy meant to say that 1937 and later went back to 2-1/4" spring perch bosses/ Only 1932-36 had the 2" perch bosses.
Back up. Interesting that almost 6700 thread views but less than 200 votes. - [ATTACH]
I'm going to more or less guess that most of what is there is 1936 - more and better pictures probably needed to be sure. 1933-34 had an integral...
I also thought that maybe you might want to consider using a '30 or '31 radiator shell, but also didn't want to get you second guessing your...
Looks like you have a 30-31 radiator. I Don't have any experience mounting a '32 shell on either of the Model A versions, but if reworking the...
Nice work, keep it up.
I get pretty much the same measurement (just under 1 inch) on a straight and solid 1935 Ford frame. Measurement taken at the center piece same as...
TCI has excellent mounting instructions for this kit readily available on their webpage - 5 pages with about 15 detailed diagrams and pictures....
I saw your other thread with regard to attaching the front quarter panel brace to the subframe and for what it's worth the picture posted by...
Nice work on the Roadster body - the detail you're putting everything together with is a way ahead of what goes into many "restored" bodies!! As...
Here's some pictures I took when removing a cowl post from the remains of the subframe. The area where the rear rivet goes gets covered by the...
The 9" rear end came from a 1957 Ranchero. The Ford 9" from 1957-59 are significantly narrower than most others. The adapter/spacers for the...
[ATTACH]
That's how the tail light was mounted on the early 1928 bodies. Looks like the bracket has been modified (shortened) somewhat. By '29 they were...
Looks like a 1932 front axle on it (the original for sale one)
Not much that hasn't changed other than the building in mid-picture: - [ATTACH]
TEST -[ATTACH]
1970 I believe
Everything else "appears" to be later than 1932-34 (the cross steering, etc.) so 1935 would seem the most likely, especially if it was under a...
Is this the same one you were putting a Pinto engine into in 2012??
- Model A experts insist that they were originally intended for the top assembly to rest on. This is also somewhat substantiated by the fact that...
Whole setup looks pretty shaky to me. Shock absorber link looks to be touching tie rod, or very close. Spindles appear to be 1946-48 Ford and it...
All your earlier pictures seem to be gone (?)
https://www.weedetrstreetrod.com/
Try posting on the Vintage Ford Forum if no help here - lots of very knowledgeable ex-Fordbarners there. including a very knowledgeable...
Do you have the rear sub-frame cross-member and the panel below the decklid that attaches to it? EDIT NOTE: Since going back thru this thread I...
Pictures, etc. in this old Fordbarn thread: https://www.fordbarn.com/forum/showthread.php?t=244476
Here's a picture showing what 8.90 X 15's look like on the rear. This roadster has a couple of spring leaves removed and reversed spring...
Fordbarn ad: https://www.fordbarn.com/forum/showthread.php?t=251723
Great to see an update Kellan. Keep them coming!!
Separate names with a comma.
The Jalopy Journal
