The Jalopy Journal
I have a turbocharged 223 in my f100!
Ford 240/300 dizzy will work with a mod.
Welcome to the HAMB. I have seen you truck around the Bako in the SW area. Engine sounds good.
Holley kit 2300 will fit the L-1379. The CFM should be ~350. Given that it is the same size as the holley 2300. You could also measure the...
Also id # is located on top of the frame rail, on the passenger side, right under the firewall.
For the oil you can install a tee where your oil pressure sending unit is located. One end of the tee will have the oil sending unit the other end...
Use a "Draw erase pin" and fill in the sharpie mark. Then wipe with a towel. It will remove the sharpie mark!
MC for manual disc/drum
1976 F100 2WD Cardone "MANUAL Dual Master Cylinder" Part # 101617
Here is a parts list:...
And the the other car.
Just ask the owner...
Thanks. I have followed your build on that other site. You have done a awesome job!!! And yes it does take a while.
Just stock for now.
Have not got it out of the garage yet, but the power increase should be from 30-50% more torque then horse power. I have a couple of videos of me...
I start with a easy I.Q. question like.... Do you have any "Fallopian tubing"?
The move on the the next thing that I really need...
I have a speaker cover.
White gauges in my 1959
Changed the head bolts to ARP studs. I also installed .022" steel head gasket coated in Hylomar Universal Blue. For fuel I use a inline electric...
1959 223 inline 6, set at 5-6 psi for tuning. May turn it up to 8-10 psi after I get it A/F and the timing right. The turbo is a T3/t40E
I used a...
Looks great, You'll be proud when you finish the build.
I'll be there this year. Weather looks like it will be great! Its been about 5 years since I have been.
Grab a tape measure and see if the extended/collapsed measurements fit your application. If you do the leg work and find a set that fits it will...
This is for a 3 or 4" drop axle in front and flipped axle in the back....
Separate names with a comma.