The Jalopy Journal
I have used ppg for 25 years since i first tried it. Never a
The best paint in my opinion
I used a 56 car bellhousing a 68 sb toploader a truck flywheel
with the truck 11" Long pressure plate. And a 11"clutchdisc that fit the...
I Think its the Chrysler Norseman and its on the bottom of the Atlantic
Aboard the Andrea Doria that sunk after she colided with Stockholm
Well.... its under progress a lot of other
Projects happened. But i rolled it in the
garage this friday actualy
Hi Dana reminds a lot of mine built in 65
If the thermostat is in the block and not the intake
Its a 400M
Any script on the valvecovers?
If the intake and head is parted inside the valvecover
its an FE Engine 332-428
no you need the later crank
To fit a toploader you just use the bellhousing
from a passenger car. I used one from 56 but
Think they are all the same. If you have a small...
But i Think 37 had fixed windshield
Mercedes 300 sl gulwing engine
Have a 292 y-block in my 25 Chrysler
Beacuse its a Ford Engine. So i dont have
to be able to find spareparts everywere
i go like the sbc crowd:):)
My dads first car. A 37 Tudor in the Winter of58-59
I own that car now
Sally she was my girlfriends dog when we got together
but from day one she was my dog.She loved to ride in
the hotrod with me or a boat trip...
HAHA good eye:D
Here she is after a forced landing in Sweden 1944 -29-05
one shoo got lost in the restoration and she got painted
No doubt having the tube straight like that give most stiffnes
but its better to have a bend in that tube if you crash
it helps to soften the...
A Mercury pickup??in front of the race pickup
427 2v HUUUHHH? no such thing exsist to my
knowledge. What casting numbers on the heads
How big carb do you have? how is the cam degreed?
Ahhhhh im going blind im going blind
So ugly that if it had a mother she would
have killed it
And The sedan is even ugglier
I take back my previous statement
I forget to Count with idiot the factor
No you cant`the u-bolt will snap Before deforming the tube
Thats true. I use the lapping only to check thats
the seat is true to the valve if you get lapping
marks around the whole seat its fine
0.111 Contact area sounds fine to me
cant see it in the pickture but do you
got "lapping" marks 360 degres around the seat
Then its fine
I dont know about "ghetto".... I call it the OLD "Blacksmith" way:D
but i use it all the time Its faster than reaming
I usualy take a old...
put a washer over the screw weld it to the screw
beacuse its easyer to weld the washer to the screw
thats broken of almost flush with the wheel...
Hi Dean what headlights are those
No its a bigger Engine than the fe
I Think they have different king pin inclination
so you get funny camber. But you can bend the
tubeaxle to compensate
Separate names with a comma.