The Jalopy Journal
As I understand it it's not the rpm as much as it is the amount of horsepower they are rated for.
The down side to this is: before I was pretty sure I couldn't afford a custom merc, now I'm positive I can't afford one, or probably any merc.
I'll admit to being spoiled, in my last shop I had a natural gas heater and in two hours I'd be working in my tshirt:).
I Finally have gotten started on my tri power setup.
I've got a 2400 watt heater I can plug into the plug for my welder it will bring...
I imagine there is always going to be some air trapped between the fluid and the gage unless there is a leak in the gage or fittings, this is...
All is well here, l hope all is well with you and yours.
With the buying and selling of houses and all the renovations here I haven't had time to...
If this is the one you're looking for I would sell it for the cover price of $59.99 plus shipping. It's in New condition.
I don't have the answer to your question but as I recall from about 2 years ago in my 30 model A speedometer the cable turned counter clockwise...
There are lots of warnings about not using cinder blocks to hold up a car. When there under load a small tap can cause them to disintegrate.
I just finished this whole thread, keep up the good work. I enjoyed your book. Good luck with the Model A.
I'm thinking a right hand drive model A box might do it but would probably be pretty hard to find in north America. Or a f1 box...
Very nice, where did they come from.
It's your car now, do what you want. I would be to busy driving it to take it apart.
I would not be concerned about minor gaps as long as the not at the end of the leafs. If you think they might be digging in just clean...
If I had a vote it would be leave the lights and add a mild fender trim.
I used the F1 king pins to install the complete f1 spindles and brakes on a dropped super bell model A axle. The steering arms needed a...
Sure, you might just be able to put it in the mail.
Awesome t shirt, if you're really going to get into the on line t shirt business I'd be interested in one, but it probably won't be...
I voted more because I didn't get much done in the first part of the year because we were buying and selling and moving back to the...
Good day everyone
Has any body seen a volt meter that would fit in the stock ammeter location. I'm still using the stock gas tank so it...
Interesting, are those Ontario license plates?
In my early 20s l bought a early 60's C10 with a 327, 4 speed, headers, thrush mufflers and 4 feet of exhaust pipe on each side. The first...
I've used the push up with the knee method put instead of a hammer I used my pneumatic chisel with the blunt attachment to rattle the...
Well we are getting a stretch of temperatures around freezing but this doesn't look quite like spring yet.:rolleyes:
Great looking car. Right now I have the mini van seat on the stock riser, so if a chop is in my future there is still room room to go down.
Wow. It might be good for a 1/4 mile at a time or the flying mile but probably not so good for Saturday morning coffee.
Great looking cars, I'd really like to see how the seating is arranged, especially the A coupes.
When I first pulled the body off my car I looked at the frame. As it was in pretty good condition I considered selling of the rolling...
Under the passenger floor of my 30 coupe, a mirror image of the stock location.
I have to wonder if there are a lot of buyers to support that kind of market place. The pandemic has certainly caused a lot of...
Separate names with a comma.