The Jalopy Journal
Shoot I’ve got some catching up to do! Looking good man!
Some of it is the low angle the photo was taken from I think. A further back/ standing photo would show us what’s going on a little better but...
If you’ve got any other ideas that a photo mock up would be handy let me know. Doesn’t take me very long to do a rough up like I posted.
All of that is fantastic!
Keep in mind when mocking up your extra rear end that a quick change has the driveshaft/ torque tube exit at a...
@chaddilac here ya go
Yup I think it’s titled the hulk or similar I’ll tag you in it
@Nobey method works real well, @porknbeaner showed me that one.
I use two socket extentions beat together as a perfect sized drift/punch and...
[ATTACH]And then I chopped the whole grill/nose down to match the cowl a little better
Ok first we have a hood side added and the opening made taller[ATTACH]
Heat probably wouldn’t hurt but yeah your gonna have to hammer them out.
i’ll try to take a photo of my “ford bushing removal tool” I made...
I liked the track nose flipped with the opening extended up some more.
will it run a hood?
[ATTACH] Pats contact info and IG
Here are three different ones he’s made. These are 53/4 chevys but he’s done plenty others. They all use the same drip rail grip but the rest is...
Dan, my buddy pat makes what your looking for I’ll gather some pix and info and post later.
Long as he can find a car to measure etc he can make...
Glad it’s come In handy!
Oh man I really like that!
You probably won’t notice any ride characteristics changing but spring behind will require a lot less frame step to get the car that low. Really...
I think it’s got the propane 10:1 pistons in it, built a header and opened up the intake. Figured I’d pull it apart and do a cam. Back and forth...
Looking forward to hearing it and your reviews.
Mines pretty much stock and that’s not going to cut it. Seems to be a lot of power to be made...
Did the roadster pickups engine ever come home
From Machine shop jail?
@Austin kays @BigJoeArt you guys will dig this
Killer post man. That’s such a thrill finding a little un expected nugget of gold under the dust.
A few years back placing the hopup water slide...
I want to say @TexasSpeed has a similar set in his roadster
[ATTACH] I’ll see if I can find a phone number and private message it to you
There ya go.[ATTACH]
this is a little longer than normal but it’s typically a few weeks I’ll grab there post from
Earlier today to share
@dumprat do you drill straight into them or use some sort of jig?
I was thinking I’d mark and chuck up a proper sized nut in my drill press and...
I think the concentric ridges on the inner diameter would make it easy to see where your at.
he’s done this before and I haven’t but I’d assume...
Separate names with a comma.