The Jalopy Journal
I should have mentioned the BP is 5x5.5 not wide 5. The brakes were converted to Bendix by the PO.
Do 15" rims, proper bolt pattern of course, fit on stock 1939 Ford drums?
That is how we did it in a bike shop where I worked in 1971.
They shouldn't allow T-buckets in car shows. About my T. It was the first show I went to.
I did a bicycle seat about 40 years ago with spray adhesive. The naughtiest is still stuck.
That's part of the problem there are a lot that look just like that. Apparently the difference is isolated or grounded case. That is grounded case.
I have a '39 Ford converted to 12v with an 8CM engine. What starter solenoid do I need? I searched and since they all pretty much look the same, 4...
You've come a long way from your T. Not that it was bad of course.
I am in PA. You might check with your local State Rep. That is what I did to get my T titled and registered. My Rep actually had a pamphlet on...
Jerry you continue to impress!!
Next project trophy room?
I am anxious to see it. Maybe at a cruise around here. Wheels of Time in August?
A little space would be nice. But at least it's inside.
I hope to not remove the engine but if I must I will. The engine does need painting.
Posted on another forum so apologize if a repeat.
My '39 Ford hood hinge mounts are bent. I tried to fix in place with c- clamps which helped but...
How does your front swaybar mount, 1939 Ford, attach to the axle? I have a dropped Ford axle with a tubular shock kit. I don't know...
I know this is an old post. Did you put any support under the air deflector/plate on top of the grill? What gauge metal for the plate? Do you have...
I know a LONG SHOT. I need a 1939 Ford hood from Janesville, WI to somewhat near Allentown, PA. Not sure about timing but not too long.
Personally the Olds but it's more about the story. I bought a '39 Deluxe with an Olds with 3-2s in about '62 for $350. I pulled it for a SBC. I...
There website says between east and west zones. They have a map with the zones defined. It is possible.
Any ideas on how to and maybe how much to ship a 1939 Ford hood? Wisconsin to PA.
Gorgeous!! Now THAT is one BADASS hot rod!
And you have every reason to be proud. You've taken a LONG journey since your T!
I thought the same thing when I first put it back together.
Because the '39 has cross steering they do move somewhat separately because the...
'39 Ford, Posie reverse eye spring, dropped axle what would be a good clearance between the draglink and the wishbone, unsplit?[ATTACH] I have...
Thanks. I looked at the shackles. They are Pete and Jake's and have urethane bushings not nylon like the "pucks". Should they get lubrication?
Putting a Posie Super Slide front spring. I removed it to put in a dropped axle, '39 Ford. Should there be any lube at the nylon bushings for the...
New never installed AAW Fan Relay Kit. I don't need it. Price is shipped, Paypal Friends and Family[ATTACH]
Gorgeous! Love the tags.
Separate names with a comma.