The Jalopy Journal
It seemed fairly obvious to me that there were several failures in Scott's mishap. Everybody else is able to stop...but with a catastrophic...
Pinion angle is a consideration...provided the oil stays in the engine.
It's always a divissive issue...but safety certainly has its' merits. Roll cages in race cars are designed so that the driver can walk away from...
Old School Cool!
Many things targeted to a specific market, for a high price, are in fact much more common in other applications. This is but one of them. Good find.
What you are seeing in part is just a small part of the "correction" (gotta love that term!) of the American economy. It also includes farther...
Just like pulling brake drums...apply some heat to the block around the stud.
Nailheads are nothing but neat! Torque is the thing...HP is low compared to most other engines, but looks are killer!
That is one neat and rare old car...'ya gotta get it and do something with it! I'd think the possibilities are limitless. Good luck.
'Ya gotta make it live again! Congrats for the find.
Brain fart...Generator, I meant.
Is that a gererator on that car?
As long as you're getting older...you're ahead of the other option! KEEP GOING!
Support your local H.A.M.B. ers...put 'em on here!
I've got a 400 SBC that was built 12 years ago...made 500HP on the dyno, and runs on pump gas. Trick Flow heads, nice rump-rump cam, single plane...
Neat looking ride!
Go with your heart! Which one is more desireable to you...that is the answer. Congrats to you for your help with your mother...you'll only have...
DRILL! Make sure your bit is very sharp, andif some spinning begins, put vise grips on the back side, if you can get to them. Slow and easy makes...
As a customer...you should expect a legitimate answer!
I'd suggest talking to one or more of the better known hemi builders. If they are reputable, they will give you some advice, and guidelines. They...
A chain to hold the boat!
Light smoothing is fine...just don't get "into" the weld.
A good cam to show you how some specs can really make HP! Like 'em a lot.
Gulps & Gobbles...but big power!
Better try the doors quick! You have to have a plane to work from, and if you distort the doors, your problems will multiply.
Get the equasion for the tires/rear/trans...then set it properly. It's no big deal when you have the right combo.
Kinda like someone is looking at you from every angle! LMAO! That Airstream is REALLY old, and very interesting. The COE...nothing but just cool!
Can't say it gets my vote! Sorry, but definitely a different idea.
There's a little good, and a little bad in everything. Roller lifters are great for a BIG cam in the solid function. In either solid or hydraulic...
Separate names with a comma.