The Jalopy Journal
It will take alot of fab work. Look into the Ansen type pedal assemblies, They use the early 60s chevy truck clutch/brake master cyclinder
With your gear ratio I would run the turbo 400. Unles cruise plans are adveraging over 75 MPH
Sounds like readjust your linkage. Remove the shift linkage and make sure the park paw is locking into park solid. Then adjust linkage around that.
Buddy of mine runs mustang fox body 351 windsor headers with a few steering box clearance dings in his 351 powerd 55.
Tommy 13 years ago when they redune my hydraulics (4 way by pass) You told me all would be well, Passing along those words back to you. Cal
Simple fix. Check the wear pattern on the eccentric ror the fuel pump rod, After makeing sure the locator tab is located. Surface across the front...
Be there friday only. Cal
Try all The Long Roofs Cal
Tommy was here for me in 01 when I had my heart bypass (new hydralics) And asured me all was gonna be fine. Get well my friend. All will be well. Cal
I will be there friday as a turrist, New 37s not ready and not vending Cal
I like the locktight adhessive,
Happy bday to all ya. Cal
I still use the real Ford or merc rings. Try cool stuff?
My rule of thumb is measure center of headlights and center of thread. Use something brake frendly.
Happy B-Day DAD! Cal
Appears to be 40 Ford backing plates and 35-6 Ford spindles. Your a long waze from being set up for buick drum brakes. Cal
The norm is a 57-59 Ford car or first series 67-77 Bronco. Depands on your wheel bolt pattern you want as well. Cal
A definate must. On my 60 Falcon gasser. I took it down the local highway for a test thrash. When I snapped 2nd gear the hood poped putting my...
I did a simular chop on a 53 chevy 20 years ago, Was going to use a 46 chevy rear winow cut but got to looking at a donar 71 Camero. Cut the back...
Lug king or lugnut king on the e-box. Ive bought a few sets. Cal
Do the brakes now. $300.00 worth of parts is cheap insurance for you and the one you may hit.Cal
Happy B day brother Paul, Cal
I missed the first 50 But came on shortly after Rocky, Then due to a computter f-up I had to change some thing after a few years. Cal
65 up ford to around 72 should have disc brake center hole and be fairly narrow enough to fit. I did the same swap years ago with 4 inch lowering...
15x7 supreams 215 225 70 series tires
Nebraska does a storage title after searching tru Lincoln and finding last owner, You send certified letter requesting storage payments for min 90...
When I build/shorten my colums I go to the hardware store and find the bearing I need and tach weld it or pean the tube.
On my gasser falcon I cleaned mine real good with rubbing alcohal and sprayed a mix of yellow and clear. worked great. Cal
Sounds like Butch. Cal
Separate names with a comma.