The Jalopy Journal
Heater, Side-Curtains, Muffler, Scarves!
^^^ Often took a lot of tack & 'flip' to remain square, flat. IE all four corners level-to touch.
Maroon offers a deep rich color & contrast to: polished AL, Nickel, Chrome.
Most delightful Tale, glad you took us along!
Number of alloys, treatments. Yes.
Believe, in that George did have it!
Man, what a ride that was...
The pair, claims also to fatten the spark. Not a bad setup at all.
Remembered 'Detroit' in '72. Cruising Woodward Ave. ☕ Till all hours. George Fitzios crossed over from Windsor, Ont.
Dairy Mechanic. ;)
^^^. Let us know ;)
Saw one of these blocks at Reg Bernier's garage, Nottingham, NH. :eek:
We draw close as our career slows. Most here will support long-time contributors.
When uncertain, good then to ask around.
A review most helpful, thanks
Was thinking, a correct for '60's 'Show-bucket" style. Structure done right, would not trouble. Love the added 'mystery' or Roth touch.
All we need is few True believers!
Things go south quick-like :eek:
Or handle, of chosen dri--vair!
Recalled, where Al has no endurance-value, vs. Steel. which if made having sufficient 'design-capacity' does not fail. Fatigue strength is a...
A search here will tell.
His son Matt contributes now & then, esp. about his dad.:)
Amen bros, Burlington gives a call to all of us in N. E.
Nice to learn the relations here.
^^^ possible tis a flexible Fixture...System!
Very sad to learn of his passing
Recall from my stint at local Jenny station...
Large diffuser tipped torch ,
Brake drum aglowing!
(Maybe dry-ice woulda helped on the axle!)
In '73, put ~ 9 K mi. on in 3 week coast to coast in my vair front, vette rear '31 coupe. I went w/MG r&p, once the tie rod length &...
Ha, them Mainahs know how to get miles, out of a dollah! ;)
Or, tense-pull on, the IMPACT socket 'drive' bar, and TAP bar handle end w/a hammer. (No ratchet need appy here)
Then, if esp. stubborn...use...
Compatible spindle & axle, for king pin inclination, sounds like first order of business.
Believe I used the relay/starter post & a ground on my SBC's
Whenever 'Lectrics' starters became reliable!
Can the mig be softened?
Around Beantown, Richie was the guy!
Separate names with a comma.