The Jalopy Journal
Speedway motors in Lincoln Nebraska sells a 4v to 3x2 adapter. $175 bucks
Some days, I am the worst mechanic!!
My 1959 430 Lincoln in my 37 coupe dirt racer tribute car[ATTACH]
In 1954, ihc, international harvester company, produced a tractor with a planetary gearset to provide a shift on the go ability. The standard...
I have new quarter panels to install on my 1937 Ford coupe. I have been thinking about overlapping the panel 1/2" and using a panel bond(glue)...
Building a car as a memory of the days of my brothers and I racing 57-58 ford's and mercs at local area dirt tracks in the 60's and 70's. Two of...
What is the best carb cleaner for a crudy old carburetor? And what is good for polishing a carb? I have 6 old 94 Ford carburetor to get ready for...
I'm building a 6x2 log intake manifold for my 430 Lincoln engine. Using the 94 carburetor. Do I need any power valves?
My 1937 tribute dirt track racer
I do have the caster camber gauge. Works great
I did look at the coupe today. As for the engine running like sh t, I checked the gap and found it had worn the rubbing block and the contact...
Took my 1937 Ford coupe out for a test drive today. The front wheels shimmy so bad that I had to keep it below 30 mph! Then the 430 Lincoln motor...
When an engine is modified, each cam, compression ,etc requires a new timing curve. It's not just initial timing and total advance, it also has to...
A REAL race car
My almost finished 37 tribute dirt track racer
One of the tbirds had a injected 368" Lincoln and ran something like 180mph before it blew!! Goodbye plastic corvet
The reason I asked about the lack of cross bolted mains is back in the mid 60's my buddy and I looked at any 427 galaxies sitting on the used car...
a local racer that raced the Nascar tracks in the late 50's said Hoolman and Moody went broke guaranteing the Y block Ford race engines they...
Girlfriends DD bra
Thread file, every GOOD mechanic has at least two
Plug the hole. Later Ford distributor did not have the oiler that few oiled anyhow. The shaft gets plenty of oil from splash or blowby
Heck, I don't know what I'm doing. I just wanted to see if anyone else remembered it .
The very first 1963 427 ford's with the single carburetor didn't have the cross bolted mains . Only the 2x4 engine.
Maybe take the cable off at the speedometer end and see if it even turns.
Self etching primer. No rust ever(almost))
Everyone has to start somewhere. Like Smokey Unlock said, everything is a learning curve. Give the kid a break.
Toughen up, no matter what you want to do, their will be criticism, some of it (constructive). Welcome to the pack.i want to add that the hamb has...
I think it's a great custom. Most of the members (including me), would never have the imagination to modify a car so much. At least he tried!!
So no Chevys. Didn't gm sponsor any cars??
Thanks for the help , have a good day.
Separate names with a comma.