The Jalopy Journal
have you double checked the bell/depth of a 60 t bird steering wheel, its a really deep wheel.
65-73 Mustang Steering Column Lower bearing Retrofit for R&P or Borgeson 3/4" | eBay
you will need one of these too, as when you do the nut up...
Borgeson 990040 Column Shaft, Replacement with Floor Mount, 65-67 Mustang | eBay
its what is used when doing a power steering...
this isn't tea bag...
wheatsheaths in heraldry = 'GARB'
the ploughed furrows could be considered to be 'BARRY'
they are forged. That /\ fine gentleman Rich B done did these for me.
I found some oem rhd 37-40 spindles and then another...
12 century, plantagenet
passant guardant x3
yes with 39 deluxe lights.
I am finding impossible to find 38/9
1. running boards
2. inner fenders
5. 39 grille
I think the 72-74 has the same centre bore as the mustang - or the stock size register for a small bearing 8 or 9'' axle shaft
the drums are 10 by...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
knew it was nearly possible
why do the brake tube nuts look like they are not even in?
I have a new box and pitman arm, 71 olds
want to get a bolt in one and then have the chance to move it about - especially when the spring...
if i have a rhd jeep cherokee box, i take it its 1985 and upo - metric, is the bolt pattern different?
FORD 1935 36 37 38 39 40 STEERING ADAPTER GM BOX AS-2095 | eBay
like that but mirrored
cleaned up my 1967 ranchero rear end
first I need to move the spring saddle over
IF the axle is 1967, the isolator housing and rubber (...
you are supposed to swap in the inner bearing cone from the kit?
its not already in there - the correct one?
just fitted one of these kits
in a 1950
does the pitman arm point backwards
body filler in the frame rails...................
I am confused
the hinge is in two parts
the hinge plate bolts to the body - waht size
the moving hinge bolts to the plate - what size
Stainless UNF Raised Countersunk Slotted & Phillips Machine Screws. 10-32 & 1/4" | eBay
iI have bought these.
so its a 10 guage - wire guage
Windshield Frame Screw Kit • 1935-39 Ford Passenger & Pickup (cwmoss.com)
are the screws that hold the frame together the 'same' screws?
Hello please help
what is the thread on a 37/9 winsheild frame where the hinge attatches to the actual frame
is it a countersunk screw
is it a...
it may be that the box itself will only travel that far?
i think i have seem 800 saginaw sector shafts with both 3 teeth and 5
what traval at the...
s10 is i think 6 inches on centres -
jeep grand cherokee
1. has the same clocked straight ahead splines
2. has a similar drop
3. is longer i think...
So, is a 195 80 15. 2021 Suzuki Jimny tyre 29 inches in diameter
I looked they are 27.3 inch
So they have the load rating on them which is great,...
/\ i think this needs varification.......
is a 16 by 4J - J being where the tyre sits actually 4'' wide
or is it 5 inches outer rim to outer rim...
greatm is the lower side cowl panel on a 38/9 the same as a 40/41 pickup
or would a 40 pickup fender bolt to a 39
Separate names with a comma.