The Jalopy Journal
So I picked up these cobalt blue kopp glass signal lenses for railroads I bought all they had I knew I could use them on the car somewhere...And...
Thanks I should have more updates now that I am working on it a little more..
Wild It will be!!!!
Today I made some heat extractors to help get rid of some heat.. [ATTACH] [ATTACH]
Thanks Stogy I will update all of you on that a little later!!!
The air bags will work with the knee action I have removed the springs from inside the cylinders and the shock valving and oil that was in...
Thanks Stogy I think the fins are fine its the angle that the pic was taken.As far as the front suspension your right it adds ballast and looks...
Well the bubble is blown!!!here it is set up on the base that I made.After seeing the what bad chad did on his tv show I thought that may be the...
Thanks its the strongest one I know of..
I was thinking of going this way but I allready have a trans and transfer case from a blazer I know I like to do things bass ackwards.Lol!!!
I just realized Ihavent updated in a while I added 5 1/2 inches to the rear fins.more coming...[ATTACH]
This is a great thread!!! Showrods are still alive and well as I and many others are keeping it going.
As it is dec 25(as I have done for years) I figured I would post some shots of what I am up to on the car.I have been working on what was the...
Its harder than it sounds..LOL!! I know where the bubble is going I dont know where the driver and passenger are going to sit..LOL!!
The corvair headlights are done ...Next up making the tailfins bigger [ATTACH] [ATTACH]
[ATTACH] [ATTACH] Made the side inlets for the radiators
Thanks!!! The engine has a six two barrel setup on it
Thanks for following!!!
Yea I think your right!
Here are some updates for you guys..The first pic is about where the engine is going to sit.The second pic shows the 50 packard hood and where I...
Well I built the frame and yes your eyes dont decieve you thats a 1938 chevy dubonnet knee action front end I have plans on an air bag setup in...
Thanks so much!!
Nothing at all its gonna look good there.
I cut the body 12-1/2 inches down the center.
Well.... the engine isnt suppose to go here... but I kinda like it!!!...stay tuned!!...
Separate names with a comma.