The Jalopy Journal
Can deliver to Hot Rod Reunion in Bowling Green, KY next weekend. Email me at email@example.com. [ATTACH]
[ATTACH] [ATTACH] [ATTACH]
Can deliver to Hot Rod Reunion in Bowling Green, KY next weekend. Email me at firstname.lastname@example.org.
Ford 292 Y Block engine. Runs, but could use a rebuild. Can deliver to the Hot Rod Reunion in Bowling Green, KY next weekend.
Email me at...
Bump again. Give me a call!
The price is dropping just in time for Christmas.
Bump. Call me. Cash talks!
34 Ford truck Traditional Hot Rod
Time to sell so I can fund my unibody project
All steel body
292 Y block completely rebuilt
I am looking for a thermal switch for an electric fan. On at 185, off at 165, with 1/4 NPT. I can't find one from any aftermarket source- they all...
Check out john mummert's y block website. He has everything you need to know.
Posted using the Full Custom H.A.M.B. App!
Thanks guys, I'm making a list
Planning a trip to San Francisco soon. Have any recommendations for traditional rod places to visit? Shops, museums, junkyards, etc. Thanks.
Now that Sierra Specialties (brakecylinder.com) is out of business, where can I get a 60 GMC master cylinder resleeved? Thanks.
The hole definitely is not tapered. Thanks for the help. I will get it together tomorrow.
The flat spot on the kingpin is aligned in the hole. The lock pin goes through enough to get the nut on. It just looks like it needs to go in...
I am building a 34 ford truck. Chassis Eng. axle. My kingpin lock pins are too tight to go in flush with the axle. I would appreciate advice...
I am considering buying a 49 ford car with no engine or transmission. I have a 401 nailhead that I could put in it. Does anyone make motor...
Thanks, I'm convinced. I'll stay away from them.
I am going to use 37 ford tail lights on my 34 ford truck. Speedway has a version that is LED. I want the lights to be bright, but still...
for steering links clearance, at least in my case.
These are model a bones flipped and pie cut. The cut at the top is 1/4 inch which gave me 7 degrees caster.
Yes I have the drill in reverse. I lubed the part of the housing that the cable attaches to and the odometer gears and now it works. I guess it...
I am putting a 56 chevy dash in my 34 ford truck. I have a speedo cable out of a 66 nova that will screw onto the 56 speedo, but the needle...
Here is the 34 I'm working on. It started out big, but is getting smaller.
Thanks, guys. That gives me a good idea. It is about 30 minutes from my house, so I'll swing by and get a better look at it.
A friend of mine sent me a picture of this truck for sale. I was hoping one of you guys would identify it for me. Thanks.
Anyone used the cable x? It converts the electronic impulse from a transmission to a cable output so you can use the original speedo. Thanks.
I have a cool 50s boat steering wheel that I plan on putting in my 34 Ford truck. Has anyone adapted a boat steering wheel to a car steering...
In my November 2009 issue of Street Rodder magazine there is a model A that belongs to Bill Steele of Pennsylvania. It has 16 inch artillery...
Separate names with a comma.