The Jalopy Journal
I have his cam in my engine and his sticker on my back window and I will treasure them always.
Look for other damage and if none and you know someone who is try the silver solder or braze. Fatal cracks are ones into combustion or valves. You...
Thanks for posting the answer. After reading all of the posts and guessing along with you it is great to hear the actual result.
32 wheelbase is 2.5 inches longer than model A. If you center year wheels in wells of A hood will need to be 2.5 inches longer
One item to look out for is that there are two 32 rear ends. Early one is like model, late one is like 33 and 34. Merc flathead will need truck...
If the mounting surface is on an angle it is reverse corvair
Using ford valves and will be pulling heads soon and hope to be able to indo a permanent solution
I have a 400jr cam and have the same problem. Have had limited success with staking the threads. Loctite only works when you get all oil off. Ford...
I love WW
Frame rails look like 1932or something other than A. The bottom of the body is near flat and the 32 rails dip down in the middle the center...
I was 10 in 1955. A 38 Chevy 2dr brush painted red with a corvette 6 with split exhaust passed our house almost everyday with me on the porch...
In my world it was 1957.
My windsshield is stuck tilting outward. I guess it is good that I have not fixed it.
The distributor runs off of a venturi signal from the carburator. If you have an aftermarket carb or signals are not matched it could be your problem.
Several things are happening. First is counterfit lifters That are not hardened properly. Second is reduction of zinc in oils to protect catalytic...
Thanks for the pictures from a previous Ohio resident
Go small and you will be happier unless you race with your buddies.
I did not do this and I was sorry later. The little wrenches don't work very well with a high lift cam.
Hope this gives you some ideas.
Try the ford barn you will get lots of answers.
Cheap light fast or really cool and $$$$$$$$$$$$$$$$$$$$$.
His model a probably had an F1 or F100 box. the inards are the same but the box is different. Truck comes out the side and yours comes out the bottom.
What I would like is a Ford 3 speed with a columbia 2 speed axle.
If you are absolutely positive all of your work is 100% wait till the end but if you make mistakes like I do start it early and it will be easier...
I have seen starters with so much crap inside that they were bound up from dirt and rust. It is always a surprise when you open old parts.
PITA to set valve lash.
I have an 8rt with a 4-71 blower and I am using three 5/8 belts. Mine is about 3/4 inch longer than standard two belt. My pulleys are home made.
If you do not have it buy the Bishop Tardel book.
Separate names with a comma.