The Jalopy Journal
It's the gauge. ...... This is what happens when you don't have air bubbles in your gauge line.
I couldn't help it sorry
My Buick is 60-90+...
Correct. It wasn't until 67' or so model year that equipment laws for new vehicles required parking lights to be on while the headlights were on....
8.5's came in Turbo Regals 84-87 (3:42)and 442's (3:73) They could also be had with the Aluminum drums. Notice the tabs. Squared tabs = 8.5"....
Chevy monza and Buick Regal had close..... But no cigar.
There went my ideas
Update. Work has been crazy but this is where I'm at now.
The chatter is coming from the field relay. And when you kill the RPMs way down it...
Sorry here is the video. The chatter is the sound that sound like an empty power steering pump. It doesn't seem like much but it's pretty loud...
Tried the extra ground no go. .......here's a vid of the chatter and let out on the clutch kill it down and it stops[ATTACH]
iPhone 5s iOS 8.1 chrome does the above
Android 4.4.2 tablet works great
The chatter is coming from the Voltage Regulator on the firewall. It's got me stumped???
I have this issue and have no idea where to go next. Here are the details.
Car 65 Pontiac. With a chattering Voltage Regulator.
Good idea, added.
It snowed a little here in Jefferson today as well.
I'll have to be keeping my eye out now. All kinds of pieces needed to get this thing working. Even if just for the "neat factor" Thresheree is...
It has an auto feed and a keyless chuck. Fits up to a 3/8" ish maybe a 1/2" drill bit. It is about 3 1/2' tall.
It is possible that it may came...
Deleted. Pic of Olds motor is not OPs 77' engine.
The 77' Pontiac engine will out power the 79' Olds engine by quite a bit once it's freshened up.
This is correct many only opened only 3/4-7/8 of the way. For sake of ease, Only the high performance models opened fully from the factory. They...
To expand on what causes the vibration when a Shaft and U-Joints are not run Parallel.
A video will say more than I'm willing to write.
My favorite multimeter that I use daily is the fluke 88. It has most every function I've ever needed. It even has dwell
roads (atleast our roads) are made from oil..... just tell them you made a new spot and they should replace theirs:)
that sounds like mine..... There are some areas where you litteraly have to scrape up the mess every so often. because it just wont...
I was wondering the same... Theere all Right hand drive here
And to answer a answer earlier definatly not a checkmate. that was athe "camaro"...
Sounds like you are missing the positive on the switch to the coil. :)
3-M also sells it for use in making up stress cones and rain shields on 25 KV and up wires and underground splice kits:)
No insert needed... Im not saying they were bad... They dress and act as they do for the SHOCK factor.... and being labled a douchbag by...
<TABLE border=0 cellSpacing=0 cellPadding=6 width="100%"><TBODY><TR><TD style="BORDER-BOTTOM: 1px inset; BORDER-LEFT: 1px inset;...
Yes an out of adjustment cable will cause low line pressure and slip/burn the tranny up get it adjusted properly!!!!!!!!!!!!www.bowtieoverdrives.com
One other thing to check .... they are VERY important......make sure they are every where.....You can not have too many
yep that is what the dealer will do and it too will go out....very common:o
Separate names with a comma.