The Jalopy Journal
Yes on the block end, Just pull the wire off the plug. Small end of spring goes in the boot end of the wire and the bigger end goes on the plug.
Do you have an older small block with a spin on filter? If you do just remove the adapter and change it out for the one on the van. Just did this...
Welcome from another Montana member
Nice job bringing it back to life, Looks great.
Trans will not be affected by lowering the front, you are lowering the body and frame as a unit, you had to cut the tunnel because of the drive...
Welcome from Central Montana
Here is the one I have up now.
Center of the state, 100 miles north of Billings
Welcome from another Montana Member
Welcome from another Montana member, I also have family in the Root.
I have to disagree on no oil, there are 2 threaded holes in the front of the engine on the fuel pump side. If you leave the top bolt(3/8"x1/2")...
Crap I need to learn more about non Chevy powerplants.
And if that doesn't fix it check the valve adjustment.
New to old fords but doesn't the BB in the motor # mean 1 1/2 ton truck?
in the search you will also learn about putting a filter in the upper hose to catch the sludge before it gets to the rad.
Another vote for 255/60/15, had them on my 66 short box
Welcome form Grass Range
This should get you what you need.
The four that holds the box on are 1/2"x 13, Inspection cover is 1/4" x 20.
What is the difference between the powerpack and the double hump heads?
Mount a couple to your bench and use them to hold odd shaped or big pieces down while sanding or grinding.
I just picked up one, guy wanted $75 but traded some parts for it. He said it was a 283 or 327. I expected it to be a 283, complete from pan to...
Up to 99 right now.
New rule inforcement, no posting on classifieds.
Damn type to slow.
Welcome from another Montanan
I have some more but need to resize them and will upload more.
Separate names with a comma.