The Jalopy Journal
you could use the east wood rust paint. last time i used it they told me it could be top coated with almost any paint/ bed liner
you are worried about the car being dirty.......so taking a rag and scratching the shit out of the paint when you smear around the road grime is...
140 for the whole set? so both inner and outer bearings for both sides? 140 isnt a bad price if its all 4 bearings. do you need them all or just one?
holy shit balls 42 1/2 feet long? :)
the sport coupe was technically a 3 window.......
yup its only the tranny hump. mounting it straight to the frame gets them really low as well with stock suspension
they mount them so high so they dont have to cut the floor for the tranny hump....i mounted mine right to the frame and built a hump.
chevelle headers will not fit without modifying. i've tried. why not just run cheap block huggers. arent they only like 45 bucks
Dude are you six years old? There is a big difference between no punctuation and no spaces between words. everyone else can read his post just...
dont see why you cant tighten the nut..........
i always use the high temp duplicolor stuff. seems to hold up for a while and is about the same price as rustoleum.
you know simple green specifically says to not use it on vinyl..........
yup its posted in the kkoa thread. its blue now.
we are rather pleased with the stance it has...
so i started a thread before but thought i would try again. its a 1928 ford roadster pick up. we started with only a closed car cowl and...
the plans to finish it up and drive the wheels off of it. all black except the wheels.
started with only a 29-29 closed car cowl and the rest is all from scratch. the drivetrain is all from a 46 chevy and its a 216. the dash is a 34 unit
i like how you call everyone cheap fuckers after this whole thread is nothing but people talking about how they are all the same damn battery....
actually you're wrong. they can be hollow
cross steer or tiller steer? 49-52 chevy boxes work great for tiller right hand drive
sm420 that was the last year for them
what do you say?
here is mine again. with some updates
look a little closer. there is a leaf spring up front, and those mounts look a little heavier than your saying.
he's talking about a car that already has no rear section
just take the rear part of the touring body off and find a bed. its been done a bunch of times.
yeah the truck is in kansas. i saw it at a gas station here in emporia last summer
also the shifter is between my legs
my scrub line is fine i measured it the day i took these pics.
Separate names with a comma.