The Jalopy Journal
Look at the pickup he has for sale!
If you loosen the screw it might need a screw driver to open the slot a bit.
My coupe has had a loop in the cable for years. Still working fine
Take your hose to the company in your area that makes and sells hydraulic hose. They can copy yours.
Some of the folks that have them for sale have just bought them on a wild hair. Don’t know anything about the car. They may not know if it’s real,...
I found the easiest way for me to do this is small cad plated screws. On the garnish be sure to hit the screws with a wiz wheel to shorten them....
Show us what you need.
Did you buy a Q jet kit to do the rebuild?
The grease follows the axle to the outside of the housing. By turning the grease gets to the axle bearing then it can leak as the bearing wears
My favorites. Love the 32pickup[ATTACH]
I did a engine trans swap in a 63 Chevy. Had no issues. Used V8 mounts.
A couple of my friends that are now gone used to put wheel bearing grease on the shoe rubbing spots. They would grind them until they were mostly...
So you are a normal person. What’s a little screw up.
What is it made out of. Older is usually pot metal. Later aluminum.Looks more like 60’s Ford to me
Got new shocks for my 32 coupe. Old one were shot. Got the new ones on had the spring adjusted about a 1/4 inch up. Removed stands and jack. Car...
Plymouth maybe. Has a ship
Thanks for not chopping the top.
Thought all that was needed was the correct hole pattern and correct Ohms . Set the float arm.
Had one loose on a 55 pickup. I didn’t know any better I just fixed set the valves and went on
I used eBay pans on a 54 Chevy sedan.Would have been easier to have usedEMS. Less fitting .
Symore (sp). Theirs sprays great. Store upside down. Hard to find local here.
Finally got my speedo corrected to within 1 mph of what the GPS says. Next is to get the steering wheel centered to where the turn signal switch...
Why use brass? Are you gonna finish it good enough to powder coat. Myself I’d stir up some brand of epoxy.
Got some tri five interior stuff. What sort a of lengths do you need.
How big is the hole.
I use one that cuts all power forward. Small easy to wire and works.
Watch out for cidellas head liners. The last two I was involved with were crap. One was made backwards. Yep backwards. The other was too big in...
What they are here in Texas
Separate names with a comma.