The Jalopy Journal
HAMB name - Moose
He custom makes multi intakes and dual exhausts for mopar flat 6's.
If you end up stripping out the screw head, try the old trick of welding a nut onto the screw.
The heat shouldn't effect the rails, if you use...
Did you try heat yet, or are you trying to save the glass and gasket?
I've used a impact screwdriver before with success.
Who is this "Williams"? Do you have any contact info?
I'll check there... Any other Hamber suggestions?
I have a 1939 Ford gas gauge that I would like fixed as well as converted to 12V.
Who have you guys used?
The famous "Lee Kelly" has had a stroke...
I used a picture of myself so other Hambers will recognize me when I set-up at swap meets. I'm always looking to meet new friends.
try wiggling the headlight switch knob left and right a little.
I am having similar problems, but my anti-virus keeps blocking it, was happening yesterday also.
Where did you get those #'s? They don't match my book.
They should be on the back of the block if I remember correctly.?.
Something about the solenoid being upside down for clearance?
I got a book, what are the numbers?
I had heard that there was something unique to the starters in those hydro trucks, or maybe starter location in the bellhousing? Does anyone know?
Very nice, any credit owed to master metal shaping mentors?
I did it off and on all my life and can't reccomend it.Too much smoke, too hot in the summer, hard on your eyes, dirty work for the most part,...
Turn on the gas, and switch the polarity. Do the opposite for the drivers side.
I think I might, what exactly do you need?
Will not fit.
Wow!, any close up engine pics?
There is alot of TRUTH to these video's, I think they are worth a bump for people who might have not seen them...
I can't seem to stop thinking...
"I am a big guy over 300 pounds"
1935/36 Truck firewall gains you roughly 3" or so/ compared to the 35/36 car firewall.
I stole the idea/knowledge from some friends cars, but I...
Thank you very much, that answers my question.
I appreciate the help.
No luck on that site, my trans reads:
Tag on case: HEF F 025114
Cast onto case: C3AR 7006-E
And: C3TR 7A040 W-2
Anyone know any other websites?
Does anyone know the first gear ratio in a stock F100 3 speed tranny?
Specifics- 1961 6cyl.
Have you asked Paul Norman in Rochester NH?
He's on the HAMB under"PaulN"
I believe he currently has an old 40' Heavy Channel/chop job from the...
I just re-read your post, SUCK-IT-UP and do it outside/garage. If "comfortable weather" was an issue, you wouldn't be living in MASS!
I weld in a 100 year old barn, it is falling down on me.
I get nervous when I use the heat wrench(oxy/acet) or Air Arc Gouge, thats when the...
Separate names with a comma.