The Jalopy Journal
It looks dirty, it looks sinister ,it looks done
Great job, love it
IF you were thinking to scrap it do us a huge favour and run a little experiment.
Put it in a press (using safety precautions of course) and see...
What is the issue with dot5?
looks good with the rear bumper in place
Just watched it again, missed it the first time . I thought the stock was riding on the roller.
Would this have been all that's needed to prevent...
rule no #
watch for whip
What accessory would be used to prevent this?
[ATTACH] Finally able to post in one of my favourite threads
This is my turf, north east Victoria
man , I am a bit slow
Only looked on this thread because I was curious what a round tuit was
Took another look this morning and now I know!
Great story , road trips and roadside fixes!
Deserves a bump
whats the story with the tank? looks like its had an interesting life
So I had her moving under her own power until l bent a clutch linkage which l had manufactured.
All part of ironing out the bugs before l have to...
[ATTACH] I think it brings out the lines
I think the look is everything, if it wasn't about the look there wouldn't be a hamb and we would all be driving buzz boxes.
Worth as much time...
This is one very cool looking ride.
I am guessing the torque rod will necessitate some work to the floor at the rear?
starting to reassemble door glass and window felts.
Just a tip , the little screws that come with the kit need to be thrown to the shit house....
The colour is a recent ford colour
I have found most of my time with the wiring is actually trying to work out which wires in what loom and the best way to run them
Long time between posts but getting closer
Screwed up the wheel backspace, looks great but will not work
Car is back from the painter, really...
worth watching, interesting story
[ATTACH] Some say l look similar
Will be the crowning glory when l finally get the car on the road
whats the theory about not welding the ends?
So not having tried to bend cast iron myself are we agreed that the bent axle is cast and able to handle some bending
And do axles actually bend...
In my 36 coupe I used an aftermarket cable drive set up .
Now a smart fella would mount the motor drive in the boot so you could run the drive...
Well looks like l have been pretty slack in updating my build thread.
Progress is happening but slow.
I had a go at spraying the firewall myself,...
Looks like someone is trying to send a message
with the throttle in the closed position the spring should still be under some tension .
You may need to undo the two mounting nuts (inside the...
I have an A model axle in my 36 coupe, dropped by a local fella.
split bone and heat on perch eyes to get all lined up
Anyone have info on the flathead with rear distributor set up?
Separate names with a comma.