The Jalopy Journal
BTW, Mobil's Vactra #2 is the premium way lube. All...
Your SB is a very nice lathe. The serpentine belt was a good mod.
( Every time I hear or see the word "serpentine" I'm reminded of...
This is an ATLAS 10" lathe that my Dad bought in the mid 60's
It didn't get too much use, but we did find some half-nut parts that it...
Some of those early Clausing 5900 Series variable-speed lathes had a hydraulic actuated VS drive.
We had one of them and that one-way hydraulic...
Is that meant for me, Maintain?
If so, I've not reached that point yet.
I think the best route would be to make a "bulge" to clear the...
What brand are you talking about ? Might be helpful to know.
Is the seller implying that the longitudinal does work ?
If neither work, it could be...
So much depends on what you want to do with the lathe.
Agree with all opinions on a 6” being too small to be of much use other than to learn on....
Has anyone put disc brakes on the front of a '56 Lincoln ?
TIA for any info.
just noticed that there's 2 threads running about the Lincoln.
steer me in the right direction.....LOL
I like it!........'will be following along.
Are you going to use the original engine/xmsn ? or.......
I had owned 2) 56 Lincolns before. Great...
Plymouth had a similar fastback model
Can’t recall the name, but I think the model designation was P19
maybe the "quads" from a '57 Dodge for a happy medium; inner light being smaller than the outer
What happens when the yellow wire is removed?
Is this when shut off?
OK, found a discussion on the Horn Ring; so, we'll try the "push in center and use a rubber mallet" method
A friend has a'47 Ford V-8 that is really in great shape....except that the ammeter is causing some problems.
When the car is shut off, the...
...let me guess
the oil loss was due to a leaking valve cover gasket
great job !!
Bought a set (straight & right-angle) of Astro Onyx 1/4” die grinders in 2018. 'Been very good grinders and are used a lot.
I see that Amazon...
You're right, jaracer;
item 4 of the IMDb Trivia Page for the movie
My bad. Can't even read the charts correctly 15/32 would be too small ID for 1/2 “ bolt
A hardened 7/16 SAE washer (15/32 ID) would do the job nicely. However, the OD is a tad big at 59/64...
Probably an unhardened cheap import washer; way too big.
Something to check, as the only issue I can see is the unformed thread portion...
Best explanation I've ever seen of how velocity can change in a drive shaft assembly....
my mouth was open too watchin that video... altho the bubblegum music isn't that great, I kinda lost track of the topic of the thread
so.... if you LEAVE a conversation, it still appears in your list, but is grayed out, right?
Does that mean the other intended person does not see...
Zack, sent you a PM
Will the rear fenders remain bolt-on?
Or are you going to weld them to the body?
This 6v Radio came out of the 1940 Chrysler Royal Coupe that's been undergoing some changes. No idea if it works or not, but I think it did. The...
Separate names with a comma.