The Jalopy Journal
This looks promising!
Now that you mention it, I can see that seems to be the case. The car came with the 55 Chevy taillight kit, but neither the lenses or bezel fits
The last pic I posted is the 55 Chevy tail trim.
Possibly just a poor fab job
Thanks for the reply! The Plymouth lights seem to be too large
Hey all, just picked up someone else's project a couple weeks ago and I need some help identifying what taillights are on her.
I thought 55...
When we put the car on jacks and put it into drive it would just barely spin the tires when you gas it
unfortunately this did not work for me
if the cable is not adjusted the transmission would still be pushing fluid then right? so im looking at torque converter not installed correctly...
just thinking now im sure that electical wire is the reverse light on the trans. duh!
so get a book and properly adjust it first before pulling?
I did over fill it, but still nothing. Trans might be coming out tomorrow
Did have it idling in neutral but nothing. If the pump was bad wouldnt it whine? Or not always?
if its not seated then it wont suck tranny fluid? what about if it doesnt go through the tranny cooler lines
got it from the original owners granddaughter and she said that her grandpa had rebuilt the motor. motor looked a bit dirty on the top tho, but it...
hey guys just picked up a 64' chrysler 300 with a 413 and a pushbutton trans. got the motor running, but cant seem to get the transmission...
ive been told coca cola and marvel mystery oil in spark plug cylinders and crank motor over (without sparkplugs) and let the oil and cola squirt...
Duh! Lol thanks guys!
The only thing is that the 318 flex plate bolt pattern is to small for the torque converter.
so do you think its the correct one for my 55 dodge?
alright finally got the pics!
Its a nice little motor and a lot of pep when you step on it. It lays rubber pretty good.
Lol good thing I only paid 700 for it!
Thanks just what I wanted to hear!
Just picked up a 63 nova guy says it has a corvette motor in it I need some help to id this motor properly! Castin number on the back is 3782870...
Unfortunately I can't post pics. Would a late 60s car have a torque tube driveline and the ebrake on the tranny?
Hey guys need some help to id my transmission I just pulled out of a 55 dodge royal. I ran the casting number (2801260-7) which came back as a 727...
i like the way it looks on Peter Guida RPU might do something like that. im just gonnna stick the sbc in it because i got one for free. ill stick...
its just sittin there now, trying to decide what to do about the gap between the frame and bed. like the way it looks up there but will be making...
need some help as to what to do with the bed on my buick. dont know if i should run without one or a short one or massage the one thats on it! any...
Yeah as do i, practically stole it from the guy! he had to get rid of it so i scored. yeah caddy big block is ideal for me. since they look alot...
Separate names with a comma.