The Jalopy Journal
It's a double d shaft on ididit column.
But is the column too close to the header? I'm concerned the heat will cook the lube out of the u joint and end bearing on the column.?
I plan on putting a support bearing on the engine support with another joint between the support and the vibration joint on the end of the column....
the steering rod will be routed under or through the engine support.... steel double d
Do you think it will cook the end bearing and u joint? Need a shorter column possibly.
OK... I bought a set of Sanderson CC-1 headers. Looks like there's plenty of room for the steering shaft. Plus there's room for the spark plugs...
OK so I bought the Patriot H8052 headers. I really like them..BUT the come out too far from the block. The exhaust pipe will be a pain to run by...
Welcome from the Outer Banks of NC
Anyone used this style header? Looks like it would be great for steering clearance?
Ordered a set of the TruRam exhaust manifolds thinking they would have more clearance for the steering but dang these things are huge! Looks like...
Drop it like it's HOT!
Hey Hitch..I hear ya! I've had lots of steel but to be honest I got soooo tired of cutting rust and patching this and that. Thought I would go...
Wow...that's the first time I've heard anything like that about Outlaw. Guess all of them will have issues at some time or other.
Was that an Outlaw car? I had a buddy that bought an A and C Willys and he had very little issues with it.
Thanks guys... good info Red!
I was able to get the glass down in the door but had to cut access holes to get the felt channel in the metal...
Right Crash....That's what I think. I like both steel and glass. I had a sweet orig body
32 Plymouth PB 3 w rumble seat car. Loved it! Had a...
Thanks brigrat... good tip on the fenders! NICE looking car!
Having a tuff time getting the PW in the doors. The car was ordered without them installed. I can't seem to find the right u channel...
Thanks Hotrodprimer... I have heard good things about Outlaw and they have been VERY helpful on the phone!
This car was built in 1998 and never...
I've had both....... just happens fiberglass is what I have now.
Just checking to see if anyone has an Outlaw Performance car or know of someone that is building one? I have a few questions..
What do you use to set flat glass with no rubber gasket? Silicone or urethane?
Any recommendations on a trans shop in Virginia Beach or Eastern NC that is GOOD? I need a 700r4. I saw a few online shops but long way if you...
40 is Sweet!!
1934 Chevy Outlaw car. Ordered some stuff today, hope to have it on the road by spring!
Looking for someone reputable to do some work on my 35 Chevy, brake lines, steering column etc.
I live in NC about 30 minutes from Chesapeake VA...
I just bought a 1935 Chevrolet sedan Outlaw body and frame. Although I have been working on rods for years I don't have the resources (tools,...
Separate names with a comma.