The Jalopy Journal
And they have pretty much switched to a different sandpaper grit grading system too.
I used color sand lacquer jobs with 600 grit before...
It looks like the Lexus's air bags didn't deploy ??
Lexus must have been flying through the air pretty fast to hit that high and cause that...
Phillips Classic Auto Glass
3782 South Westwood Boulevard, Poplar Bluff, MO 63901-9143
(573) 785-1927 ‎
I like handy tips like this... Thank you for posting it.
It looks like that is old, cracked lacquer paint. Lacquer was the factory paint on your chevy.
If it is and you don't get all the checked and...
So it is an East coast car now!
You made me grin by posting it .... Thank You!
I put a lot of time in that little Willys.
I bet it is showing...
Here is an inexpensive way to get those spider web scratches a towel makes on dark paint jobs.
Give this a try:
Go to the home improvement...
Another good source of clip, trim and rubber is Restoration Specialties.
Get the catalog.... everything is in real size making it easy match...
I know a bit about the building of this car so I am going to add to Weasel’s post.
While I was living in the Jackson, Wy. area, I had a...
A friend of mine took these photos at the 1960 NHRA Nats.
Ohio George ...
Nope.... the plumber's crack he is showing cancelled the "right of the tats" posting deal.
Yeah... Sam should have known better than to ask about a shifter and get something like this started.
I don't think it is the same John Moore. John is a bit young for that time frame. He from Billings MT. and lived in Pocetello, ID. He was the...
More John Moore photos taken at Belgrade, Mt. 1958 or 59. No action pics... but the pit shots are great. Here is the thread with more photos....
I posted these photos some years ago from my friend John Moore taken at Union Grove, Wisconsin 1964. More photos and story in this thread....
I contacted Skip Reado right after the twister because I couldn't find out if Ayer was hit too. He said Dennis was in York.
Thanks everyone for the bids.
Funny... my house was at Craig and Jones!
I just moved to Pahrump.
Billy, I am not one of your "haters".
But... I do hate to see paint stripper getting into places on any car that will cause problems when a car...
And if you make that masking tape tab at the wrist before you put them on a guy can use that tab to pull the gloves off without...
I knew I missed including something.
Maybe several "somethings".
The tip you added is the kind of info I hope gets added to this...
This is a "how to do it" post!
A couple of recent posts got me to thinking about using paint stripper. One of the posts was a guy who had just...
Yep! Moved it all.
I don't want to hijack the thread... PM me.
Hey... My phone is still the same number!
Since I am almost as new to Pahrump as you are to the HAMB I will try and keep you from getting jumped on.
Most the folks here would love to...
I have seen some nice cars here in Pahrump. Just haven't met any rodders yet.
The LV Speedway is a good suggeston. If you like the cobras go...
F-150 4X4's are considered Traditional Hot Rods in Pahrump.
And I just had to move here.
Tex gave me several of the first issue of HRMX the day he got them. I was only a block from him and it is my old shop on the cover. This magazine...
I am with you... keep it simple. Is this what you were refering to?
One of the problems with clear coating black is that clear scratches look white on dark colors.
I single stage black when I can.
Very, very nice Don!
Separate names with a comma.