The Jalopy Journal
Just a quick ? Regarding these power plants. I have a 390 and was curious as to what radiators you guys are using to keep them cool?
Finally got the rear spring perch welded up and last arm in place. So far I'm within about 1/16" in all measurements.....couldn't be happier! Off...
Any takers at $20
BTT with $35
'62 caddy driver side exhaust manifold. Good condition and no signs of cracks.
Almost forgot this little guy. Scored this tranny from a local guy here in town. Supposedly freshly rebuilt and is super clean inside.
Not much to report but a little more progress. Frame rails welded up just need to clean up the welds, rear spring perch cleaned up and ready for...
Here's a couple that I had posted on the other non official thread. Hope it's ok to re-post them.
Here's a few I snapped
Any takers at $75????
Have an early set of Cadillac script covers. No dents, rust has been removed but they do have some pitting. Let me know if you would like any...
This seems to be checking out as a non super cobra jet but still needs to go.
I have this 428 that I was told is a Super Cobra jet but have not checked it out myself. Unfortunately this was sitting outside and was locked up....
Cuts, clamps and measuring to make sure all is square.
After double checking all my measurements...
Threw my frame rails onto the table and made some cuts in the rails so I could start contouring the rails. Also made my cut outs so I could fit my...
Hard to believe it's been two years since the last post. Been very busy the last two with daughters softball, family and every day life. Been...
I hate borrowing tools! I had my dad's cherry picker in the garage for several months and decided to put my own together. I just need to add a...
Not really sure what the difference is between the Saginaw and the Muncie. I'll have to do a little reading.
So what's the word on these Saginaws? What vehicles did these come out of and they are a manual 4 speed? I remember seeing one for sale recently...
Also, the T-500 and T-600...what are these harvested from?
Thanx for the info so far. Looking for probably 4 or 5 not sure. Will probably be mostly around town but do plan on making some trips in it when done.
Hoping someone can help out an FNG:
Looking for some ideas on transmission selection for my coupe. I ditched the 350/350 combo for a 390 Caddy and...
Yeah, the wind has sucked big ones here in the Antelope Valley. Only positive thing I can think of is if you need something sand blasted, save...
Original plan was a 350/350 combo but just couldn't bring myself to do it. I might as well build it the way I want the 1st time...
Thanx for the great info Roughneck424 and 54nomore. I have a little better idea now what I'm looking at and will keep reading.
I'll have to get with the seller. Not sure where he got the #'s from. It was a picture that he had posted in the add with the other pics of the...
Thanks for the info and pics. Dreddy Bear you are definately right about the look. I dont think I have the heart to do that to my hot rod! By the...
Separate names with a comma.