The Jalopy Journal
Everything fresh from machine shop.
Have a complete, unassembled 1953 Chrysler 331 Hemi engine for sale. This is the extended bell housing block. Must pick up. Will not ship. PM me...
Anyone out there have a picture of a 1955 Chrysler New Yorker 331 Hemi fuel pump?
Trying to figure out which one has the correct arm.
Does anybody know what front brakes are being used in the picture above?
After talking with 73RR I have chosen to go with 3.25 gears. Thanks again
to all the members that responded.
Thanks to all who responded.
FrozenMerc: Completely stock rebuild is what I was told.
town sedan: automatic transmission(no overdrive)
Trying to decide what gear to run behind a stock 331 Chrysler Hemi in a Model A with automatic transmission.
Tire height will be 31.5 inches,...
I'm going to be using the stock water pump. Was just wondering if anybody on the board had bought a "new" water pump from ebay. They were not...
Noticed a seller on ebay selling "NEW" 1951-1954 Chrysler 331 water pumps? Has anyone here purchased one?
Any feedback on these water pumps?
Thanks for all the input.
Anyone have Rick MacDonald's info? Tried a number that was online and it's disconnected.
Looking for a machine shop in Southern California that works on early Chrysler Hemi
engines. Any recommendations? Thanks in advance.
joecool: Thanks for the info
gimpyshotrods: I'm sure its safe, just wanted too know if anybody have any experience with
the adapter here on the hamb.
d2_willys: Still available from Wilcap
willys36: Yes, that's the adapter I'm inquiring about. Wondering if anybody on the hamb has used it.
After our conversation, I decided to post this up. I wanted to see if there were any actual users
on the site. There was a 727 with adapter...
Thanks for the input. I will call Patrick. Just a little concerned about the bolts on the front pump.
Anyone here on the hamb familiar with this adapter? Was wondering if someone here
has used it or has any experience with it. Looks like you have...
Thanks to everybody for the advice.
What can I do to clean it properly? Only the inside is getting chalky not the outside.
Do I use the cleaner again and rinse it...
This weekend I cleaned an intake manifold with Eagle One etching mag clear and it
looked great. This morning I noticed the inside of the intake...
Does a 59 el camino box work with the stock front suspension? What's involved
in installing it?
What did you decide on your gauges?
I'M looking to in stall a f-100 9 inch ford rearend in a 1950 Mercury but have a few questions.
First ones is what the center to center leaf perch...
Does this kit push the wheels out?
This kit works with the fatman uprights....I emailed them and never got a response.
But I'll take your word for it. Thanks again for...
Separate names with a comma.