The Jalopy Journal
How is your recovery doing? Any long term effects?
Anxious to see how the low buck build is going.
Eric, as to the van, are you going to put a Hemi in it too?
Ever get those springs?
Posted using the Full Custom H.A.M.B. App!
The engraving looks just raw enough to be beautiful. Great look. Can't wait to see it finished.
What part of the country?
Anchorage, Alaska and it was -35° F. in 2 feet of snow, no garage, laid on a piece of cardboard and still froze myself good. Had to change out the...
I'm curious. How does wood dissipate heat?
In all the years I have been working on cars I have never had a jackstand slip, bend the vehicle frame or collapse. I don't buy cheap stamped...
Try one of these.
I took a home and farm welding course at the local vo-tech for a refresher. Evening adult education course. It entitled me to discounts at a...
I used Ride Tech on my 56 F100. Good customer service and an excellent product.
Don't get discouraged man. Like anywhere else the moment you ask a question you will get 400 experts with different opinions all...
Looking good Eric. Hoping to see paint soon. Your attention to detail is something else.
You can cross the starter solenoid across the lead from the battery to the small terminal nearest to it with a screw driver to start it or hook up...
I think you are the mistaken one. How can something being pushed by a spring from the outside draw air past the object being pushed by the...
My mother died from cancer. There will be pink on my truck in her memory when the time comes to paint it.
It all depends on who did the work and how well they read blueprints.
There was one near my house that converted to FM broadcast back in the 70's and so we used to sit outside the drive-in where we could see the...
1966 Buick SportWagon with the little windows around the top of the roof.
That would make a great tail dragger with a chopped top and fender skirts. Maybe change out the grille. Drop it into the weeds and cruise!!
Love the Molotov Cartail!!
Generally Mustang II uses 1° positive Caster (not Castor as I have seen it here before), 1/2° positive Camber and 1/8" toe in +- 1/8".
As long as the up/down angle matches on the transmission and the side angle offset matches there should be no problem. Example: Pinion up 2°,...
I know, I've done it and she didn't think it was cute either. I was making fun of the wording. Kind of like the Amish when they say; "Throw the...
Why would you paint headers in the oven?:):rolleyes:
Specs are 1/8" +- 1/8" - toe in.
I was told by the guy who rebuilt my carb to run non-ethanol gas if at all possible. I can still find a lot of pure gas here in OK.
On a side...
Separate names with a comma.