The Jalopy Journal
Stuck needle & seat,the push home probably shook it free
Welding aluminium is easy once you get the right settings-wire speed and amps,start welding and turn the controls while your welding and you will...
Is that simply heating it up before its injected or is there more to it.
Bio diesel is interesting ,what quantity do you make per batch
So whats the free diesel thing
Unless you know exactly what you have the safe bet is to connect them,keep an eye on your oil pressure aswell
You introduce yourself here and ask Questions on the board ;) and welcome by the the way:)
Great stuff Ryan,its the only site look at every day
Looks like it should flow better than the Ford flatty,are they used much in Hot Rods
Was the truck a tipper,it looks like an old hydraulic pump on the pto
Its in the eye of the beholder
Theres no reason why you couldnt build a sbf to go just aswell as a sbc,or most other Fords for that matter
Scribe the top edge of the Gasket to the manifold then cut it with tin snips
Tell him his dad was probably into Hot Rods and would love to see it running again
That sounds great-welldone
I feel like going for a drive now,what music was that.Happy new year.
From what i've read on the internet the crap floats to the top and you skim it off,try homecasting .com or something like that
Pull out a spark plug ,turn that cylinder to TDC,measure top of piston to plug hole,turn crank 180 degrees, measure again and the difference...
Prime it first ,it may not have enough suction to lift from the floor
Best looking SBC i've seen,nice work
Are the 427 cars getting hard to get now
428s came out in 66 i think
I thought you could option one with a 427 with dual quads aswell
Whats the last car?
Nice work mate,that grin should be back now.
You need to check the timing,if the headers are glowing red at idle most of the combustion is happening in the headers and not in the combustion...
Separate names with a comma.