The Jalopy Journal
Thanks for the info, the B engine in my A is supposed to be a low mileage Jay Taylor built with a lot of stuff done to it. At least that's what is...
The chevy rear main seal on my B engine leaks a lot.
Posted using the Full Custom H.A.M.B. App!
I found a crack in the block of my B motor. It still runs good, but don't know if it is going to get any bigger.
Posted using the Full Custom...
Well I ended up using a intake gasket between the exhaust ports and used copper high temp silicone on exhaust and permatex #2 on intake ports. So...
Has anyone used a early version of reds header where the intake ports on the block side doesn't have the welded ring around them? If so, is...
I use Delo 400
I have owned this Canadian monarch for about 30 years.
I use vinegar to get the mill scale and rust off. Just takes a little longer soak time. Works good.
RA all the way.
Here's mine. [IMG]
Are the Canadian blocks any thicker then the USA ones?
I also wonder how 49 monarch's were made? I have owned mine for almost 30 years and have never seen another one, except in pic's. Maybe it's...
Man,I am going to have my 49 monarch chopped after owning it for almost 30 years and after seeing all these nice mercs,it's hard to choose which...
Very nice panel! I have a couple questions. Do you know what pound rear springs you are using and is there a part number for the chassis kit?...
I also say sounds like diesel fuel .
I was just going to buy the new thermo dynamic cutmaster 4200, but seems that this one is made in China,while the rest of their models are made in...
A good day for me was retiring on june first of this year. Feels strange.
That paint is looking nice. I have touched up many trucks with that dark brown.:D
Mine should feel right at home up there eh? :D
I have run a dana 44 in my 49 monarch out of 48 f1 for about 30 years with no problems, except for the low gearing sucks. I finally changed the...
Some of those brown trucks have the 4.3, and they take a pretty good flogging.
Not trying to high jack this thread, but It was mentioned in this thread that if the weld doesn't look right,they would grind it back down and...
Now thats some funny shit.ha,ha. :D
I painted my 49 monarch white and like someone else said, it shows the door gaps bad. Other then that, I like white
I don't care about the price of bolts, I can't find the right one's. This isn't a delco mini, it might look like one, but it wasn't made by GM, so...
Thanks for the replies, I made some a little longer then1/4 inch spacers to get the bolts to seat. It works ok except that the drive takes a...
I like panels.
Thanks for the link. I think those are the same as the one's in the help section at the parts store. They list the bolt size online at autozone...
Didn't come with new bolts. The 4 and 5/8 are to long. I need something about a 1/2 inch shorter.
Separate names with a comma.