The Jalopy Journal
No they will not
Contact S&W race cars in Spring City Pa. they are cutting them on a water jet
Jo Kerr built one for me, and it's great. He's a great guy and know's what he's doing. Check out his web page, twitter.
Here's a picture of my...
[ATTACH] Here's mine, not quite finished
ABS firewall insulation panel for 35 or 36 Ford. This was removed from a 36 roadster that was being restored. This panel was removed before the...
Exhaust system for 35 or 36 Ford. This was removed from a 36 roadster that was being restored. The engine was started, tuned and then removed....
I've been asked about the two bolts not used on the base. The injector has duel bolt pattern, so it can be bolted down with a three or four bolt...
Saaty Meteor Fuel Injector 200 mounted on Ford flathead intake manifold. This has been sitting on a shelf for over 30 years Real nice shape and...
Just make sure that you can move the trans back and down enough to get it out with having to pull the engine. If you have to remove the front...
I'm looking for a pair Halibrand 16x4.5 or 16x5 six pin wheels.
Any help would be greatly appreciated.
If you don't widen the X member, if you ever have to pull the trans out, you will have to pull the engine to get the trans out. You have no room...
I friend wants to put a c4 trans behind the flathead in his 47 Cp. will it fit with the X frame and do the front bones need to be split...
[ATTACH] [ATTACH] Not sure if you asking about front or rear axle. I don't think it would work on the front , but it works on the rear.
Putting Chip and Richard Rawlings in the same sentence is an insult to Chip. Rawlings is an egotistical drunk that has no talent !!!
Silent Rick, are you making the wheels ?
Vintage Engineering makes them in different styles, I think they are only in pin drive and size depends on style.
This how we did it on my 36, A little more then stock[ATTACH] [ATTACH]
I had Jo Kerr build a set for my roadster, they look even better in person. [ATTACH] [ATTACH]
A wire wheel will take it right off and then you can leave them as is or polish them
This is how I'm doing it on a 36[ATTACH] [ATTACH]
Here is how I have it on my flatty[ATTACH]
Thanks for the info, I'll give the a call
Thanks for the info
I'm looking for someone who can punch louvers like in the picture.
I'm looking for someone that can punch louvers like the ones in the picture[ATTACH]
The system is pretty easy, I'm running the Holley ecu and harness. 12 volt, ign pickup. harness for the injectors and TPS. Tune with a...
It's electronic, new from Hilborn. I've driven mechanical fuel inj. on the street before and it's not always fun. I plan on running the wheels of...
I've posted this before, but I'll play again[ATTACH]
Separate names with a comma.